Art. no. 21 06 91 + 21 06 92
 

Cable stripper, automatic


 
Description
A pressure spring returns the cutters to the starting position, also ideally suited for use with fibre optic cables.

• No damage to the cable
• Sleeve is removed according to standard from fine wire cables
• Replaceable blade made from special steel
• Robust metal body

Art. no. TL mm mm²
210691 165 0.5 - 2
210692 165 1 - 4

Wire stripper
Stripping is the removal the insulation on an electrical cable (wire).

The following stripping pliers are used to do this:

Manually adjustable stripping pliers
Are set by hand to the stripping diameter by eye. The risk of damaging the cable is thus very high.

Automatic or self-adjusting stripping pliers

For fast and precise cutting and stripping. These tools automatically adjust to the required cable cross-section or insulation thickness. Thus it is not possible to damage the cable or the insulation. A lengthwise stop makes serial insulation easier.

Micro-precision stripping tools
These are used when fi ne wires are to be stripped. Data technology, network technology, controller construction, telecommunications, electronics, model construction.

Stripping tools for special insulation types

Teflon insulations are a rubber-like insulation type which make removing the insulation of an electrical cable more diffi cult. In such tough situations we recommend stripping tools that cut the insulation sleeve.

Advantages
• Constant safe stripping results
• Fault free processing
• Precision in every cut
• Serial stripping is made easier by lengthwise stop
• Automatic stripping pliers = 3 in 1 = cut + remove sleeve + strip

Do you have any questions?
info@haupa.com