Art. no. 21 06 96

Automatic wire stripper


Ergonomic, automatic strippers.

• For single, multiple and fine wire cables from 0.2 to 6.0 mm²
• Increased operating comfort thanks to anti-slip soft components on the stripper handle
• Automatic, energy-saving scanning system
• Cable cross-section does not need to be set
• Optimally positioned side cutter for up to 2.5 mm²
• Adjustable lengthwise stop 6 to 18 mm for same sleeve removal lengths when carrying out series work
• Exchangeable blades
• TÜV / GS tested

Art. no. TL mm mm²  
210696 180 0.2 - 6  
210696/2     spare blades

Wire stripper
Stripping is the removal the insulation on an electrical cable (wire).

The following stripping pliers are used to do this:

Manually adjustable stripping pliers
Are set by hand to the stripping diameter by eye. The risk of damaging the cable is thus very high.

Automatic or self-adjusting stripping pliers

For fast and precise cutting and stripping. These tools automatically adjust to the required cable cross-section or insulation thickness. Thus it is not possible to damage the cable or the insulation. A lengthwise stop makes serial insulation easier.

Micro-precision stripping tools
These are used when fi ne wires are to be stripped. Data technology, network technology, controller construction, telecommunications, electronics, model construction.

Stripping tools for special insulation types

Teflon insulations are a rubber-like insulation type which make removing the insulation of an electrical cable more diffi cult. In such tough situations we recommend stripping tools that cut the insulation sleeve.

• Constant safe stripping results
• Fault free processing
• Precision in every cut
• Serial stripping is made easier by lengthwise stop
• Automatic stripping pliers = 3 in 1 = cut + remove sleeve + strip

Do you have any questions?