Art. no. 21 07 29
Wire strippers, sensor special
|• e.g. sensor cable 3 x 0.34 mm² unscreened up to 8 x 0.25 mm² screened
• Any stripping length
• Cable cross-section does not need to be set
• Exchangeable blades
• TÜV / GS tested
• Length: 180 mm
• Ø 4.4 - 7.0 mm
Stripping is the removal the insulation on an electrical cable (wire).
The following stripping pliers are used to do this:
Manually adjustable stripping pliers
Are set by hand to the stripping diameter by eye. The risk of damaging the cable is thus very high.
Automatic or self-adjusting stripping pliers
For fast and precise cutting and stripping. These tools automatically adjust to the required cable cross-section or insulation thickness. Thus it is not possible to damage the cable or the insulation. A lengthwise stop makes serial insulation easier.
Micro-precision stripping tools
These are used when fi ne wires are to be stripped. Data technology, network technology, controller construction, telecommunications, electronics, model construction.
Stripping tools for special insulation types
Teflon insulations are a rubber-like insulation type which make removing the insulation of an electrical cable more diffi cult. In such tough situations we recommend stripping tools that cut the insulation sleeve.
• Constant safe stripping results
• Fault free processing
• Precision in every cut
• Serial stripping is made easier by lengthwise stop
• Automatic stripping pliers = 3 in 1 = cut + remove sleeve + strip
Do you have any questions?