Art. no. 21 08 45
 

Crimping pliers for
insulated crimp cable lugs


Description
Short construction, 20% angled handy form, with locking device, with adjustable crimp pressure, oval crimping.


Crimping range: 0.08 - 2.5 mm²



         

Crimping pliers for insulated crimp cable lugs
Insulated cable lugs and crimp cable lugs are crimped in an oval form. The coloured marking of the wire cross section to the insulated cable lug is defined in DIN 46245, Parts 1, 2 and 3.

Red => stands for 0.5 to 1 mm²
Blue => stands for >1.5 to 2.5 mm²
Yellow => stands for >2.5 to 6 mm²

As the cable lug is rolled from a metal sheet, attention should be paid to the position of the butted edge. It should be in the middle of the top profile. If it is on the side, the edge opens up and the wire is not gastight or adequately clamped.

Do you have any questions?
info@haupa.com