Art. no. 21 16 76 - 78
 

Crimping pliers for twin end sleeves


Description
With locking device, with adjustable crimp pressure, chrome plated, trapezoid crimping.


Art. no. mm²
211676 0.5 - 6   
211678 6 - 16   
 

Crimping pliers for end sleeves
When crimping end sleeves a distinction is made between sleeves with and without plastic collars and between trapezoid and square crimping. The sleeves with a plastic collar make it easier to insert individual stranded wires. The coloured marking on the wire end sleeves is used to classify the cross section. Pliers with a square crimp ensure better contact in the terminal strip. The square crimp also facilitates alignment and assembly, as clamps can be attached to each of the surfaces.

Do you have any questions?
info@haupa.com