Art. no. 21 70 50
Pneumatic Crimp models

HAUPA electrics crimper


Video
Description
The electrics crimper is an ideal device to securely crimp wires and cable terminals.


The electrics crimper is an ideal device to securely crimp wires and cable terminals such as:
• Insulated cable lugs to 6 mm²/10 AWG
• Tubular cable lugs, solderless terminals to 10 mm²/8 AWG
• Flat tab terminals to 6 mm²/10 AWG
• Wire end sleeves to 50 mm²/1 AWG

The electrics Crimper can be operated in one of two modes:

Mode 1:
Controls the entire crimp process by pressing down the pedal switch.

Mode 2:
Allows the user to fix the terminal on the cable by actuating the foot switch once. To finish the crimping process, he presses down the foot switch once again. Mode 2 is used for more complex terminals. The onset of compression force can be adjusted for each new terminal to satisfy crimp integrity. That way, damage to dies and terminals can be minimised. Simply press a button to select the opening for each die. Since some female terminals are more difficult to crimp, a moveable locator can be utilised to ensure proper crimping. Various standard dies are available, as well as dies designed to customer specifications.
            
with pedal switch

Technical Data Art. No. 217050:
• Dimensions (w x h x d): 140 x 220 x 320 mm
• Weight: 10 kg
• Weight of foot pedal: 1.2 kg
• Max. press capacity: 10 kN
• Pressing time: 1 s
• Counter: 6-digit LCD display
• Mains connection: 230 V / 50 Hz (120 V / 60 Hz)
• Power consumption: 160 VA
Dies for electrics crimper Art. no 217050
Art. no.  
217052 Rolled contacts 0.14-1/1,5/2.5/4 mm²
217056 Rolled contacts 0.1-1.5 mm²
217058 Rolled crimp contacts 0.1-1.5 mm²
217060 Rolled crimp contacts 0.5-6 mm²
217062 End sleeves 0.25-6 mm²
217064 Insolated terminals 0.5-6 mm² symetric
217066 Insolated terminals 0.5-6 mm² asymetric
217068 Tube terminals 0.34-2.5 mm²
217070 Tube terminals “super flex” 4-10 mm²
217072 Tube terminals “standard” 4-10 mm²
217074 Crimping terminals 4-10 mm²
217076 Crimping terminals 0.5-10 mm²
217078 Protection cover to 217056, 217060
217080 Protection cover to 217070, 217072, 217074, 217076
217082 Protection cover to 217068
217084 Protection cover to 217062
217086 Protection cover to 217064, 217066
217088 Locator to 21 70 60, socket sleeves 6.3 mm
217090 Locator to 21 70 56, 21 70 58, 21 70 60, socket sleeves 4.8 mm
217092 Locator to 21 70 56, socket sleeves (female) 2.8 x 5 mm
217094 Locator to 21 70 56, socket sleeves (female) 2.8 x 6 mm
217096 Locator to 21 70 60, socket (male) 6.3 mm
217098 Locator to 21 70 60, socket (male) 6.3 mm HN



Do you have any questions?
info@haupa.com