Art. no. 20 01 05

Cable cutter

For cutting Cu / Al cables.

For cutting Cu/Al cables
• Data, telephone and control cable, maximum Ø 25 mm
• Cu single wire, maximum 16 mm²
• Cu fine wire, maximum 70 mm²
• Cu multi-wire, maximum 25 mm²
• Length 215 mm
• Ø 25 mm
• 70 mm²

In cutting, a distinction is made between a drawing cut and a pushing cut. When the cutting motion is carried out at an angle to the tool, this is a drawing cut. However, if the cutting motion is carried out vertically to the tool this is a pushing cut.

Do you have any questions?