Art. no. 20 10 86 - 88
 

Cable cutter


 
Description
For cutting Cu / Al cables, fine and multi-wiring.

• Chrome vanadium steel, plug-on handles
• Insulating function in upper head area
• Cable measuring function thanks to the 180 degree crossover of the legs
• Not for solid conductors

Art. no. 201086 (Art. no. 201088)

• Data, telephone and control cable, maximum Ø 8 mm (Ø 12 mm)
• Cu single wire, maximum 16 mm² (16 mm)
• Cu fine wire, maximum 16 mm² (35 mm²)
• Cu multi-wire, maximum 16 mm² (25 mm²)
• Al single wire, maximum 16 mm² (25 mm²)
• Al multi-wire, maximum Ø 8 mm = 16 mm² (25 mm²)

Art. no. TL mm Ø mm mm²
201086 180 8 16
201088 240 12 35

Field of application:
for copper- and aluminium cable, not for solid conductors
Cutting Cable stripping Wire stripping

In cutting, a distinction is made between a drawing cut and a pushing cut. When the cutting motion is carried out at an angle to the tool, this is a drawing cut. However, if the cutting motion is carried out vertically to the tool this is a pushing cut.

Do you have any questions?
info@haupa.com