Twist drills DIN 338/HSS type N

point angle 118°, spiral angle 25 - 35°, Ø-tolerance h 8, of HSS, for drilling of steel, steel-casting alloyed and unalloyed up to approx. 900 N/mm² strength grey- and tempered casting, sinter iron, newsilver, graphit, alu-alloy, bronze and brass.

Packaging unit in blister pack:
0,5 - 3,0 mm; 1 VPE = 3 pcs.
3,2 - 6,0 mm; 1 VPE = 2 pcs.
6,5 - 13,0 mm; 1 VPE = 1 pcs.

xxxxxx/CO = Kobalt
Packaging unit in blister pack: 
1,0 - 3,0 mm; 1 VPE = 2 pcs.
3,2 - 13,0 mm; 1 VPE = 1 pcs.

Quantity Art.No. EAN Holding system Diameter Cutting length TL PU
230010 4011923077969 Cylindrical plug-in axle 0.5 mm 6 mm 22 mm 1
230020 4011923078027 Cylindrical plug-in axle 1 mm 12 mm 34 mm 1
230020/CO 4011923546137 Cylindrical plug-in axle 1 mm 12 mm 34 mm 1
230030 4011923078089 Cylindrical plug-in axle 1.5 mm 18 mm 40 mm 1
230030/CO 4011923546144 Cylindrical plug-in axle 1.5 mm 18 mm 40 mm 1
230032 4011923078102 Cylindrical plug-in axle 1.6 mm 20 mm 43 mm 1
230032/CO 4011923546151 Cylindrical plug-in axle 1.6 mm 20 mm 43 mm 1
230040 4011923024956 Cylindrical plug-in axle 2 mm 24 mm 49 mm 1
230040/CO 4011923546168 Cylindrical plug-in axle 2 mm 24 mm 49 mm 1
230050 4011923078249 Cylindrical plug-in axle 2.5 mm 30 mm 57 mm 1
230050/CO 4011923546175 Cylindrical plug-in axle 2.5 mm 30 mm 57 mm 1
230060 4011923025052 Cylindrical plug-in axle 3 mm 33 mm 61 mm 1
230060/CO 4011923546182 Cylindrical plug-in axle 3 mm 33 mm 61 mm 1
230064 4011923078362 Cylindrical plug-in axle 3.2 mm 36 mm 65 mm 1
230064/CO 4011923546199 Cylindrical plug-in axle 3.2 mm 36 mm 65 mm 1
230066 4011923078379 Cylindrical plug-in axle 3.3 mm 36 mm 65 mm 1
230066/CO 4011923546205 Cylindrical plug-in axle 3.3 mm 36 mm 65 mm 1
230070 4011923044558 Cylindrical plug-in axle 3.5 mm 39 mm 70 mm 1
230070/CO 4011923546212 Cylindrical plug-in axle 3.5 mm 39 mm 70 mm 1
230080 4011923044565 Cylindrical plug-in axle 4 mm 43 mm 75 mm 1
230080/CO 4011923546229 Cylindrical plug-in axle 4 mm 43 mm 75 mm 1
230084 4011923078522 Cylindrical plug-in axle 4.2 mm 43 mm 75 mm 1
230084/CO 4011923546236 Cylindrical plug-in axle 4.2 mm 43 mm 75 mm 1
230090 4011923044572 Cylindrical plug-in axle 4.5 mm 47 mm 80 mm 1
230090/CO 4011923546243 Cylindrical plug-in axle 4.5 mm 47 mm 80 mm 1
230100 4011923119324 Cylindrical plug-in axle 5 mm 52 mm 86 mm 1
230100/CO 4011923546250 Cylindrical plug-in axle 5 mm 52 mm 86 mm 1
230110 4011923044596 Cylindrical plug-in axle 5.5 mm 57 mm 93 mm 1
230110/CO 4011923546267 Cylindrical plug-in axle 5.5 mm 57 mm 93 mm 1
230120 4011923044602 Cylindrical plug-in axle 6 mm 57 mm 93 mm 1
230120/CO 4011923546274 Cylindrical plug-in axle 6 mm 57 mm 93 mm 1
230130 4011923044619 Cylindrical plug-in axle 6.5 mm 63 mm 101 mm 1
230130/CO 4011923546281 Cylindrical plug-in axle 6.5 mm 63 mm 101 mm 1
230136 4011923078935 Cylindrical plug-in axle 6.8 mm 69 mm 101 mm 1
230136/CO 4011923546298 Cylindrical plug-in axle 6.8 mm 69 mm 101 mm 1
230140 4011923044626 Cylindrical plug-in axle 7 mm 69 mm 109 mm 1
230140/CO 4011923546304 Cylindrical plug-in axle 7 mm 69 mm 109 mm 1
230160 4011923044640 Cylindrical plug-in axle 8 mm 75 mm 117 mm 1
230160/CO 4011923546311 Cylindrical plug-in axle 8 mm 75 mm 117 mm 1
230170 4011923079192 Cylindrical plug-in axle 8.5 mm 75 mm 117 mm 1
230170/CO 4011923546328 Cylindrical plug-in axle 8.5 mm 75 mm 117 mm 1
230180 4011923079277 Cylindrical plug-in axle 9 mm 81 mm 125 mm 1
230180/CO 4011923546335 Cylindrical plug-in axle 9 mm 81 mm 125 mm 1
230190 4011923079376 Cylindrical plug-in axle 9.5 mm 81 mm 125 mm 1
230190/CO 4011923546342 Cylindrical plug-in axle 9.5 mm 81 mm 125 mm 1
230200 4011923044688 Cylindrical plug-in axle 10 mm 87 mm 133 mm 1
230200/CO 4011923546359 Cylindrical plug-in axle 10 mm 87 mm 133 mm 1
230204 4011923079475 Cylindrical plug-in axle 10.2 mm 87 mm 133 mm 1
230204/CO 4011923546366 Cylindrical plug-in axle 10.2 mm 87 mm 133 mm 1
230210 4011923079512 Cylindrical plug-in axle 10.5 mm 87 mm 133 mm 1
230210/CO 4011923546373 Cylindrical plug-in axle 10.5 mm 87 mm 133 mm 1
230220 4011923079574 Cylindrical plug-in axle 11 mm 87 mm 133 mm 1
230220/CO 4011923546380 Cylindrical plug-in axle 11 mm 87 mm 133 mm 1
230230 4011923079635 Cylindrical plug-in axle 11.5 mm 94 mm 142 mm 1
230230/CO 4011923546397 Cylindrical plug-in axle 11.5 mm 94 mm 142 mm 1
230240 4011923079734 Cylindrical plug-in axle 12 mm 101 mm 151 mm 1
230240/CO 4011923546403 Cylindrical plug-in axle 12 mm 101 mm 151 mm 1
230244 4011923079802 Cylindrical plug-in axle 12.5 mm 101 mm 151 mm 1
230244/CO 4011923546410 Cylindrical plug-in axle 12.5 mm 101 mm 151 mm 1
230250 4011923079888 Cylindrical plug-in axle 13 mm 101 mm 151 mm 1
230250/CO 4011923546427 Cylindrical plug-in axle 13 mm 101 mm 151 mm 1

Set HUPshrink21TW thin-walled 2:1

Radiation cross-linked polyolefin, self extinguishing according to MV SS 302, flexible, universally applicable, Dielectric strength: 15 - 25 KV/mm according to DIN 53481, shrinking temperature > 70° C, continuous operating temperature - 55° C to 125° C, 160 pieces, in plastic box, thin-walled

Quantity Art.No. EAN Shrink rate With inner glue With tool PU
267200 4011923586683 2:1 No No 1

Cable stripping or lead tube knives

with wooden handle

Quantity Art.No. EAN Isolation protection 1000 V Blade length Shape of blade Foldable PU
200008 4011923016937 No 40 mm Straight No 1

Electricians' screwdrivers Slot

with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, chrome plated with black point

Quantity Art.No. EAN Isolation protection 1000 V Blade width Blade lendth TL Blade thickness Grip design PU
101604 4011923158132 No 2.5 mm 75 mm 160 mm 0.4 mm 2-components 1
101606 4011923158149 No 4 mm 100 mm 195 mm 0.8 mm 2-components 1
101608 4011923158156 No 4 mm 125 mm 220 mm 0.8 mm 2-components 1
101610 4011923158163 No 5 mm 150 mm 245 mm 1.0 mm 2-components 1
101612 4011923158170 No 5 mm 175 mm 270 mm 1.0 mm 2-components 1
101614 4011923158187 No 5 mm 200 mm 295 mm 1.0 mm 2-components 1

Combination pliers DIN ISO 5746

alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chrome plated, for soft wire and hard wire, leveraged, perfected cutting force performance.

Quantity Art.No. EAN Isolation protection 1000 V Length Grip design PU
210052 4011923137861 No 160 mm 2-components 1
210053 4011923137885 No 180 mm 2-components 1
210054 4011923138318 No 200 mm 2-components 1

Self adhesive sockets

for cable ties and a quick and reliable fastening of line or cable bundles and other objects

Quantity Art.No. EAN Length Width for cable ties width Operating temperature Type of fastening Material Material quality PU
262160 4011923098520 19 mm 19 mm 3.6 mm -5 - 40 °C Self-adhesive Plastic Polyamide PA 100
262162 4011923098537 28 mm 28 mm 4.8 mm -5 - 40 °C Self-adhesive Plastic Polyamide PA 100

Connecting clamps PC

• Transparent connecting clamps, 2-8 pin, polycarbonate

Quantity Art.No. EAN Number of clamp positions Nominal cross section Colour Nominal voltage Nominal current Suitable for solid core PU
265013 4011923586805 2 1 - 2,5 mm² Transparent 450 V 24 A Yes 100

ABS plastic box „SysCon S“

outer dimensions: 464 x 353 x 142 mm
inner dimensions: 400 x 300 x 80 mm
without inlay

Quantity Art.No. EAN Model Material Set Width Height Depth Padlock shackle PU
220370 4011923555146 Tool box Plastic empty 400 mm 80 mm 300 mm Yes 1

Cable glands IP 68, metric or PG, fully mounted

Quantity Art.No. EAN Thread type Nominal thread size metric/PG Colour WS Degree of protection (IP) Material Material quality Pitch thread D2 D1 B1 L1 L2 KB PU
250040 4011923496913 Metric 12 Light grey 15 IP68 Plastic Polyamide 1.5 mm 8.3 mm 12 mm 6.9 mm 7.9 mm 19.6 mm 3 - 6,5 10
250042 4011923496920 Metric 16 Light grey 19 IP68 Plastic Polyamide 1.5 mm 10.9 mm 16 mm 10.5 mm 15.5 mm 23.4 mm 5 - 10 10
250044 4011923496937 Metric 20 Light grey 24 IP68 Plastic Polyamide 1.5 mm 14.1 mm 20 mm 12.5 mm 10 mm 25 mm 8 - 12 10
250046 4011923496944 Metric 20 Light grey 27 IP68 Plastic Polyamide 1.5 mm 15 mm 20 mm 14 mm 10 mm 28.5 mm 10 - 14 10
250048 4011923496951 Metric 20 Light grey 27 IP68 Plastic Polyamide 1.5 mm 15 mm 20 mm 14 mm 15 mm 28.5 mm 10 - 14 10
250050 4011923496968 Metric 25 Light grey 30 IP68 Plastic Polyamide 1.5 mm 18.6 mm 25 mm 18.4 mm 15.2 mm 29.4 mm 13 - 18 10
250052 4011923496975 Metric 32 Light grey 36 IP68 Plastic Polyamide 1.5 mm 26 mm 32 mm 25 mm 14.7 mm 34.5 mm 18 - 25 10
250054 4011923496982 Metric 40 Light grey 46 IP68 Plastic Polyamide 1.5 mm 33.7 mm 40 mm 33 mm 18.4 mm 41.7 mm 22 - 32 5
250056 4011923496999 Metric 50 Light grey 55 IP68 Plastic Polyamide 1.5 mm 41.9 mm 50 mm 40 mm 17.8 mm 44.2 mm 30 - 38 5
250058 4011923497002 Metric 63 Light grey 66 IP68 Plastic Polyamide 1.5 mm 55 mm 63 mm 44 mm 18.5 mm 44.6 mm 34 - 44 5

Empty dispenser box

Quantity Art.No. EAN Quantity connectors PU
270870 4011923087760 0 5

Crimping pliers

short construction, for twisted contacts, 20% angled handy form, with locking device, with adjustable crimp pressure, square crimping

Quantity Art.No. EAN Crimp With locking device With cutting device With strip function PU
211656 4011923159504 0.14 - 4 Yes No No 1

Construction Glue HUPfix+

• Extrem High Initial Adhesion
• Bond Cabel-Trunks, Distriubution-Boxes and Cables to Walls, Wood and Metal
• No Retaining of the to be Bonded Parts at Overhead and Vertical Places
• Paintable

Quantity Art.No. EAN Application Curing process Colour Volume Packaging Transparent PU
170206 4011923573188 Construction/installation Cold White 310 ml Cartridge No 1

Cable ties

material: nylon, colour transparent, quick and simple to fix by hand or with tensioning tools, extremely resistant to sea water, oil, grease, etc., manufactured in accordance with UL and MIL specification requirements, - 40° C bis 85° C

Quantity Art.No. EAN Length belt/tape/tie Band width Max. bundle diameter Min. holding force Colour Material Operating temperature Mounting temperature Material quality PU
262500/1 4011923557119 75 mm 2.4 mm 15 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262500 4011923098568 96 mm 2.5 mm 23 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262502 4011923098582 100 mm 2.5 mm 25 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262504 4011923098605 142 mm 2.5 mm 35 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262506 4011923098629 203 mm 2.5 mm 55 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262508 4011923098643 142 mm 3.2 mm 35 mm 18 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262509/1 4011923557126 203 mm 3.6 mm 53 mm 18 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262510/1 4011923557133 250 mm 3.6 mm 68 mm 18 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262510 4011923098667 292 mm 3.6 mm 85 mm 18 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262512/1 4011923557140 120 mm 4.8 mm 27 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262515 4011923557157 157 mm 4.8 mm 40 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262512 4011923098681 188 mm 4.8 mm 54 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262516 4011923098711 199 mm 4.8 mm 54 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262518 4011923098735 250 mm 4.8 mm 68 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262520 4011923098742 302 mm 4.8 mm 84 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262522 4011923098759 371 mm 4.8 mm 106 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262523 4011923557164 430 mm 4.8 mm 125 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262528 4011923098773 200 mm 7.6 mm 54 mm 55 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262530 4011923098780 290 mm 7.6 mm 82 mm 530 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262532 4011923098797 370 mm 7.6 mm 106 mm 530 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100
262536 4011923098810 425 mm 8.8 mm 115 mm 80 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 50
262537 4011923557171 523 mm 8.8 mm 150 mm 80 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 50
262538 4011923098827 610 mm 8.8 mm 180 mm 80 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 50
262535 4011923557188 774 mm 8.8 mm 220 mm 80 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 50
262540 4011923098834 800 mm 8.8 mm 235 mm 80 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 20
262542 4011923098841 920 mm 8.8 mm 278 mm 80 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 50
262543 4011923557195 1219 mm 9 mm 374 mm 80 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 20
262545 4011923557201 246 mm 12.4 mm 64 mm 114 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 50
262546 4011923098865 550 mm 12.7 mm 166 mm 114 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 50
262547 4011923557218 1030 mm 12.7 mm 312 mm 114 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 100

Hydraulic hand-punching tool „HS-8“

Punches precise holes with almost no burring. Ideal for fast, frontal punching of control panels.
Extent of supply: 1 hydraulic hand punch, 1 connecting rod 3/8-24 UNF (article no. 217660), 1 connecting rod 3/4-16 UNF (article no. 217662), 1 adapter (article no. 217664), 1 spacer bushing (article no. 217666), 1 transport case.

• Punching performance: Steel sheet of up to a maximum of 3 mm
• Pressing force: 80 kN
• Length: 308 mm
• Weight: 2,4 kg
• Weight Set: 3,8 kg

Quantity Art.No. EAN Punch force Type of excitation PU
217604 4011923546922 80 kN Hand hydraulic 1

Crimping pliers

one hand precise tool, with ratchet and built-in-force-blocking device, crimping pressure 20 kN, interchangeable dies, easy to remove from the crimped lug by opening the crimping head, special small design for working in small areas

Quantity Art.No. EAN mm² Compression shape Suitable for Construction/operation Inserts exchangeable PU
215000 4011923133597 6 - 50 mm² Universal (exchangeable inserts) Various applications Mechanical Yes 1
215002 4011923133603 Other Various applications Other 1

Battery powered crimping tool „SDE240-6“

Crimping head can be rotated by 180°, with fast opening, return manually once compressing is complete, no inserts required, mandrel shape pressing.
Extent of supply: 1 crimping tool, 1 charger, 1 battery, 1 strap, in SysCon stacking box.
• Pressing force in kN: 60
• Working pressure in bar: 700
• Pressing width: thorn
• Cable lugs: standard Cu 10-240
• Connectors: standard Cu 10-240
• Pressing time, battery-operated in sec.: 6-12
• Battery charging time in min.: 60
• Battery type: Li-Ion, 18 V, 2 Ah
• With battery item no. 215523 and charger item no. 215527
• Weight in kg: 2,4
• Weight of set in kg: 7,9

Quantity Art.No. EAN mm² TL Compression shape Suitable for Construction/operation PU
216669-1 4011923608705 10 - 240 mm² 455 mm Arbour clamping Cable lugs and connectors Accumulator-hydraulic 1

Crimping pliers

for non insulated crimp cable lugs, short construction, 20% angled handy form, with locking device, with adjustable crimp pressure, mandrel shape crimping

Quantity Art.No. EAN mm² Compression shape Suitable for Construction/operation PU
210778 4011923130404 0.25 - 2,5 mm² Arbour clamping Cable lugs and connectors Mechanical 1

End sleeves

• of electrolytic copper, bare
• Dimensions to DIN 46228, Part 1

Quantity Art.No. EAN CSS I Colour TL d1 d2 s1 PU
270141 4011923087821 0.34 mm² 5 mm None 5 mm 0.85 mm 1.8 0.15 mm 0
270140 4011923087807 0.5 mm² 6 mm None 6 mm 1 mm 2.1 0.15 mm 0
270140/500 4011923087814 0.5 mm² 6 mm None 6 mm 1 mm 2.1 0.15 mm 500
270142 4011923087845 0.75 mm² 6 mm None 6 mm 1.2 mm 2.3 0.15 mm 0
270142/500 4011923087852 0.75 mm² 6 mm None 6 mm 1.2 mm 2.3 0.15 mm 500
270143 4011923087869 0.75 mm² 10 mm None 10 mm 1.2 mm 2.3 0.15 mm 0
270143/500 4011923087876 0.75 mm² 10 mm None 10 mm 1.2 mm 2.3 0.15 mm 500
270144 4011923087883 0.75 mm² 12 mm None 12 mm 1.2 mm 2.3 0.15 mm 0
270144/500 4011923087890 0.75 mm² 12 mm None 12 mm 1.2 mm 2.3 0.15 mm 500
270146 4011923087906 1 mm² 6 mm None 6 mm 1.4 mm 2.5 0.15 mm 0
270146/500 4011923087913 1 mm² 6 mm None 6 mm 1.4 mm 2.5 0.15 mm 500
270148 4011923087920 1 mm² 10 mm None 10 mm 1.4 mm 2.5 0.15 mm 0
270148/500 4011923087937 1 mm² 10 mm None 10 mm 1.4 mm 2.5 0.15 mm 500
270149 4011923087944 1 mm² 12 mm None 12 mm 1.4 mm 2.5 0.15 mm 0
270149/500 4011923087951 1 mm² 12 mm None 12 mm 1.4 mm 2.5 0.15 mm 500
270150 4011923087968 1.5 mm² 7 mm None 7 mm 1.7 mm 2.8 0.15 mm 0
270150/500 4011923087975 1.5 mm² 7 mm None 7 mm 1.7 mm 2.8 0.15 mm 500
270152 4011923087982 1.5 mm² 10 mm None 10 mm 1.7 mm 2.8 0.15 mm 0
270152/500 4011923087999 1.5 mm² 10 mm None 10 mm 1.7 mm 2.8 0.15 mm 500
270154 4011923088002 1.5 mm² 12 mm None 12 mm 1.7 mm 2.8 0.15 mm 0
270154/500 4011923088019 1.5 mm² 12 mm None 12 mm 1.7 mm 2.8 0.15 mm 500
270156 4011923088026 1.5 mm² 18 mm None 18 mm 1.7 mm 2.8 0.15 mm 0
270156/500 4011923088033 1.5 mm² 18 mm None 18 mm 1.7 mm 2.8 0.15 mm 500
270158 4011923088040 2.5 mm² 7 mm None 7 mm 2.5 mm 3.4 0.15 mm 0
270158/500 4011923088057 2.5 mm² 7 mm None 7 mm 2.5 mm 3.4 0.15 mm 500
270159 4011923088064 2.5 mm² 10 mm None 10 mm 2.5 mm 3.4 0.15 mm 0
270159/500 4011923088071 2.5 mm² 10 mm None 10 mm 2.5 mm 3.4 0.15 mm 500
270160 4011923088088 2.5 mm² 12 mm None 12 mm 2.5 mm 3.4 0.15 mm 0
270160/500 4011923088095 2.5 mm² 12 mm None 12 mm 2.5 mm 3.4 0.15 mm 500
270162/500 4011923088118 2.5 mm² 18 mm None 18 mm 2.5 mm 3.4 0.15 mm 500
270164 4011923088125 4 mm² 9 mm None 9 mm 2.8 mm 4 0.2 mm 0
270164/500 4011923088132 4 mm² 9 mm None 9 mm 2.8 mm 4 0.2 mm 500
270166 4011923088149 4 mm² 12 mm None 12 mm 2.8 mm 4 0.2 mm 0
270166/500 4011923088156 4 mm² 12 mm None 12 mm 2.8 mm 4 0.2 mm 500
270167/500 4011923088170 4 mm² 15 mm None 15 mm 2.8 mm 4 0.2 mm 1
270168 4011923088187 4 mm² 18 mm None 18 mm 2.8 mm 4 0.2 mm 0
270168/500 4011923088194 4 mm² 18 mm None 18 mm 2.8 mm 4 0.2 mm 500
270170 4011923088200 6 mm² 10 mm None 10 mm 3.5 mm 4.7 0.2 mm 250
270172 4011923088217 6 mm² 12 mm None 12 mm 3.5 mm 4.7 0.2 mm 250
270174 4011923088224 6 mm² 15 mm None 15 mm 3.5 mm 4.7 0.2 mm 250
270176 4011923088231 6 mm² 18 mm None 18 mm 3.5 mm 4.7 0.2 mm 250
270178 4011923088255 10 mm² 12 mm None 12 mm 4.5 mm 5.8 0.2 mm 250
270180 4011923088262 10 mm² 15 mm None 15 mm 4.5 mm 5.8 0.2 mm 250
270182 4011923088279 10 mm² 18 mm None 18 mm 4.5 mm 5.8 0.2 mm 250
270184 4011923088286 16 mm² 12 mm None 12 mm 5.8 mm 7.5 0.2 mm 250
270186 4011923088293 16 mm² 15 mm None 15 mm 5.8 mm 7.5 0.2 mm 250
270188 4011923088309 16 mm² 18 mm None 18 mm 5.8 mm 7.5 0.2 mm 250
270190 4011923088323 25 mm² 12 mm None 12 mm 7.3 mm 9.5 0.2 mm 250
270192 4011923088330 25 mm² 18 mm None 18 mm 7.3 mm 9.5 0.2 mm 250
270194 4011923088347 35 mm² 18 mm None 18 mm 8.3 mm 11 0.2 mm 100
270195 4011923088354 35 mm² 20 mm None 20 mm 8.3 mm 11 0.2 mm 100
270196 4011923088361 35 mm² 22 mm None 22 mm 8.3 mm 11 0.2 mm 100
270198 4011923088378 35 mm² 26 mm None 26 mm 8.3 mm 11 0.2 mm 100

Double ended spanners acc. to DIN 3110

chrome vanadium steel, chrome plated, head polished, offset at 15°

Quantity Art.No. EAN Isolation protection 1000 V WS Length Strength PU
110090 4011923050962 No 6 - 7 120 mm 3.2 mm 1
110092 4011923050979 No 8 - 9 140 mm 3.5 mm 1
110094 4011923050986 No 10 - 11 157 mm 4 mm 1
110096 4011923050993 No 12 - 13 172 mm 4.5 mm 1
110100 4011923051013 No 14 - 15 190 mm 5 mm 1
110104 4011923051037 No 16 - 17 205 mm 5.5 mm 1
110108 4011923051068 No 18 - 19 223 mm 6 mm 1
110112 4011923051099 No 21 - 23 250 mm 7 mm 1
110114 4011923051105 No 24 - 26 250 mm 7 mm 1
110120 4011923051136 No 27 - 32 302 mm 8.2 mm 1

Cable cutter

• For cutting Cu/Al cables, fine and multi-wiring
• Chrome vanadium steel, dip-insulated handles
• Insulating function in upper head area
• Cable measuring function thanks to the 180 degree crossover of the legs
• Not for solid conductors
• Data, telephone and control cable, maximum Ø 8 mm
• Cu single wire, maximum 16 mm²
• Cu fine wire, maximum 16 mm²
• Cu multi-wire, maximum 16 mm²
• Al single wire, maximum 16 mm²
• Al multi-wire, maximum Ø 8 mm = 16 mm²

Quantity Art.No. EAN Isolation protection 1000 V max. wire cross sections Construction/operation TL PU
201085 4011923481681 No 16 mm² Mechanic one hand 160 mm 1

Insulating finger gloves according to DIN EN 60903

made from latex, for working voltages of 500, 1.000, 7.500, 17.000 to 26.500 Volt. Electricians gloves by HAUPA protect from dangers through arcing faults. Pleasant, slightly roughened surface in the palm and finger area (improved non-slip)

Quantity Art.No. EAN Size Length Material thickness Volt Material Colour Long version With anti-slip layer Arc fault tested PU
120004 4011923054892 9 350 mm 0.5 mm 500 V Latex Red Yes No Yes 1
120005 4011923054908 10 350 mm 0.5 mm 500 V Latex Red Yes No Yes 1
120006 4011923054915 9 400 mm 1 mm 1000 V Latex Red Yes No Yes 1
120007 4011923054953 10 400 mm 1 mm 1000 V Latex Red Yes No Yes 1
120007/1 4011923136703 11 400 mm 1 mm 1000 V Latex Red Yes No Yes 1
120006 561 4011923054922 10 400 mm 1.5 mm 7500 V Latex Red Yes No Yes 1
120006 564 S 4011923054946 10 400 mm 2.3 mm 17000 V Latex Red Yes No Yes 1
120006 587 4011923134501 10 400 mm 2.9 mm 26500 V Latex Red Yes No Yes 1

BackpackPro „Start 1000 V“

Tool backpack for the trainee, 3 compartments can be hinged upwards to the ground, front: without further inner compartments, middle: compartments for tools, rear: compartments with pockets and flaps for tools or notebook + accessoires, padded shoulder straps, lap belt, removable pad for working in a kneeling or sitting position, comes complete with 20 tools, water and dirt resistant, material: extra strong 1680D polyester, colour: black with green stiching. BackpackPro 220265.

Content:
• Screwdrivers set 1000 V, Phillips, 6 pieces. Content: Electricians’ screwdriver 1000 V 2.5 x 75 mm / 4 x 100 mm / 5.5 x 125 mm / 6.5 x 150 mm, Cross slotted screwdrivers 1000 V, Phillips size 1 and 2
• Combination pliers 1000 V, 180 mm
• Side cutters 1000 V, 160 mm
• Long chain nose pliers 1000 V, straight, 200 mm
• VDE/GS-Voltage testers, VDE-tested 0426/72
• Cable stripping knive “Safety”, without hook blade, 8 – 28 mm2
• Industrial ring brush, size 4
• Plaster cups
• Paint scrapers 40 mm
• Stone chisels, flat oval shank, 28 x 250 mm
• Electricians’ chisels, 10 x 250 mm
• Engineers‘ hammer 300 g
• Sledge hammer 1000 g
• Junior hacksaw, with metal blade
• Super wire stripper “Basic”, 0.5 – 4 mm2

Quantity Art.No. EAN Set E-mechanic set PU
221280 4011923603502 19 Yes 1

Soldering irons

chrome nickel steel tube, with schuko safety plug, replaceable nickel-plated copper tips

Quantity Art.No. EAN Capacity Voltage Soldering tip Soldering tip replaceable Soldering tip shape Antistatic version Weight TL PU
160142 4011923060671 60 W 220 V 5 mm Yes Chamfered No 300 g 265 mm 1
160144 4011923060695 80 W 220 V 7 mm Yes Chamfered No 300 g 315 mm 1
160146 4011923060701 100 W 220 V 7 mm Yes Chamfered No 300 g 320 mm 1

Universal countersunk screw

Chipboard screw, galvanised, counter-sunk head, Pozidriv

Quantity Art.No. EAN Thread metric Length Material Surface protection Head form Screwing system Drive PU
790005 4011923519605 3 15 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790006 4011923519612 3 25 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790008 4011923519629 3 40 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790015 4011923500290 3.5 20 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790016 4011923500306 3.5 25 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790017 4011923500313 3.5 30 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790018 4011923500320 3.5 35 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790079 4011923500337 3.5 40 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790027 4011923500344 4 30 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790029 4011923500351 4 40 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790030 4011923500368 4 45 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790031 4011923500375 4 50 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790040 4011923500382 4.5 35 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790041 4011923500399 4.5 40 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790043 4011923500405 4.5 50 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 200
790051 4011923500412 5 30 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 100
790053 4011923500429 5 40 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 100
790054 4011923500436 5 50 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 100
790055 4011923500443 5 60 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 100
790056 4011923500450 5 80 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 2 100
790063 4011923500467 6 50 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 3 100
790064 4011923500474 6 60 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 3 50
790065 4011923500481 6 80 mm Steel Galvanic/electrolytic zinc plated Countersunk Pozidriv PZ 3 50

Electricians’ screwdrivers „HUPslim“ 1000 V Slot

with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated
Screwdriver with reduced blade diameter and integrated protective insulation. Deep screwing can be achieved to a better standard thanks to the reduced blade diameter.

Quantity Art.No. EAN Isolation protection 1000 V Blade width Blade lendth Blade thickness Grip design PU
102914 4011923606367 Yes 3.5 mm 100 mm 0.6 mm 2-components 1
102916 4011923606381 Yes 4 mm 100 mm 0.8 mm 2-components 1
102917 4011923606404 Yes 4 mm 100 mm 1 mm 2-components 1
102918 4011923606428 Yes 5.5 mm 125 mm 2-components 1
102920 4011923606442 Yes 6.5 mm 150 mm 2-components 1

Flat chisels to DIN 6453 A, flat oval shank

chrome vanadium air hardenend steel, golden varnishes

Quantity Art.No. EAN Length Cutting width Blade shape With hand protection Material thickness Material thickness I PU
180008 4011923061456 200 mm 28 mm Flat No 23 mm 13 mm 1
180010 4011923061463 250 mm 28 mm Flat No 23 mm 13 mm 1
180012 4011923061470 300 mm 32 mm Flat No 26 mm 13 mm 1

Hydraulic hand pliers „HHs-6“

Crimping head can be rotated by 180°, manual return after completed pressing, light and compact construction in black plastic case, without dies.
• Pressing force in kN: 60
• Working pressure in bar: 700
• Head can be opened
• Pressing width: slim
• Cable lugs: standard Cu 10-240
• DIN Cu 10-185 • DIN Al 16-150
• Connectors: standard Cu 10-240
• DIN Cu 10-185 • DIN Al 16-150

Quantity Art.No. EAN mm² TL Compression shape Suitable for Construction/operation Inserts exchangeable Number of included inserts PU
215765 4011923551032 10 - 240 mm² 370 mm Hexagon Cable lugs and connectors Hand hydraulic Yes 0 1

PVC pipe cutter

for PVC pipes and all materials made from plastics and rubber, exchangeable blade, knife made from tool steel hardened in oil.
• little effort through special cutting geometry
• optimal transmission
• effortless work through ergonomically shaped handle
• incremental knife feed

Repl. blade: 200215

Quantity Art.No. EAN Tube diameter Suitable for aluminium Suitable for copper Suitable for steel Suitable for stainless steel Suitable for plastic PU
200214 4011923520342 0 - 35 mm No No No No Yes 1
200215 4011923520359 0 - 35 mm No No No No Yes 1

Perlon fish tapes

made from stretched „Bayer-Perlon wire“, black, with solid steel end pieces, with additional pilot spring, approx. 120 mm length

Quantity Art.No. EAN Length Diameter Application range Material PU
150220 4011923059118 5 m 3 Installation tube Plastic 1
150222 4011923011468 10 m 3 Installation tube Plastic 1
150224 4011923059149 15 m 3 Installation tube Plastic 1
150226 4011923011482 20 m 3 Installation tube Plastic 1
150228 4011923059194 25 m 3 Installation tube Plastic 1
150230 4011923059248 30 m 3 Installation tube Plastic 1
150241 4011923059323 10 m 4 Installation tube Plastic 1
150243 4011923059347 15 m 4 Installation tube Plastic 1
150245 4011923059378 20 m 4 Installation tube Plastic 1
150247 4011923059392 25 m 4 Installation tube Plastic 1

LED „Mini Torch“

• Compact
• Very small and light
• Extremely high lighting performance
• LED 3 Watt CREE XR-E
• 1xAAA battery

Quantity Art.No. EAN Model Battery type Lamp type Colour housing Material Length Rechargeable Number of batteries Batteries included PU
130310 4011923556419 Bar-shaped lamp Micro LED not exchangeable Black Aluminium 92.5 mm No 1 Yes 1

Cable pulling device HAUPA PullTec

with special plastic coating, M5 thread and probe, in durable plastic housing, colour: black

„Single Composite“, 4 mm green

The advantages of the HAUPA PullTec at a glance:
• Material: Coated with a special plastic
• Slides very well and is highly elastic
• Low friction • Does not break or bend
• M5 thread • With probe
• In durable plastic housing • Breaking load: 300 kg

Quantity Art.No. EAN Length Thread Diameter Application range Material PU
143500 4011923556235 20 m M5 4 Installation tube Plastic 1
143502 4011923556242 30 m M5 4 Installation tube Plastic 1

Crimping pliers

light construction, for twisted contacts, 20% angled handy form, with locking device, with adjustable crimp pressure, square crimping

Quantity Art.No. EAN Crimp With locking device With cutting device With strip function PU
211658 4011923159511 1.5 - 6 Yes No No 1

Cable glands IP 68, metric or PG, fully mounted

material: polyamide 6.6, (gland body: PA 6.6, halogen free, seal: TPR, halogen free, washer: PVC), colour: light- grey or black, temperature range: – 40°C to + 85°C, vibration protection: integrated anti- twist protection for vibration- firm assembly, fire class: according to UL 94 V–2, protection category: IP68, properties: integrated strain relief; easy to install, completely assembled as shown

Quantity Art.No. EAN Thread type Nominal thread size metric/PG Colour WS Degree of protection (IP) Material Material quality Pitch thread D2 D1 B1 L1 L2 KB PU
250080 4011923497118 Metric 12 Black 15 IP68 Plastic Polyamide 1.5 mm 8.3 mm 12 mm 6.9 mm 7.9 mm 19.6 mm 3 - 6,5 10
250082 4011923497125 Metric 16 Black 19 IP68 Plastic Polyamide 1.5 mm 10.9 mm 16 mm 10.5 mm 15.5 mm 23.4 mm 5 - 10 10
250084 4011923497132 Metric 20 Black 24 IP68 Plastic Polyamide 1.5 mm 14.1 mm 20 mm 12.5 mm 10 mm 25 mm 8 - 12 10
250086 4011923497149 Metric 20 Black 27 IP68 Plastic Polyamide 1.5 mm 15 mm 20 mm 14 mm 10 mm 28.5 mm 10 - 14 10
250088 4011923497156 Metric 20 Black 27 IP68 Plastic Polyamide 1.5 mm 15 mm 20 mm 14 mm 15 mm 28.5 mm 10 - 14 10
250090 4011923497163 Metric 25 Black 30 IP68 Plastic Polyamide 1.5 mm 18.6 mm 25 mm 18.4 mm 15.2 mm 29.4 mm 13 - 18 10
250092 4011923497170 Metric 32 Black 36 IP68 Plastic Polyamide 1.5 mm 26 mm 32 mm 25 mm 14.7 mm 34.5 mm 18 - 25 10
250094 4011923497187 Metric 40 Black 46 IP68 Plastic Polyamide 1.5 mm 33.7 mm 40 mm 33 mm 18.4 mm 41.7 mm 22 - 32 5
250096 4011923497194 Metric 50 Black 55 IP68 Plastic Polyamide 1.5 mm 41.9 mm 50 mm 40 mm 17.8 mm 44.2 mm 30 - 38 5
250098 4011923497200 Metric 63 Black 66 IP68 Plastic Polyamide 1.5 mm 55 mm 63 mm 44 mm 18.5 mm 44.6 mm 34 - 44 5

Crimping pliers

light construction, 20% angled handy form, with locking device, with adjustable crimp pressure, mandrel shape crimping

Quantity Art.No. EAN mm² Compression shape Suitable for Construction/operation PU
210779 4011923159467 1.25 - 6 mm² Arbour clamping Cable lugs and connectors Mechanical 1

Twist drills DIN 338/HSS type N

made from hight power steel, in plastic pocket.

Technical information:
Standard version: Industrial quality, dressed to size from solid material, high true tuning precision, long tool life, cutter separate packet in plastic bags or as a set in a box. /PB: as beside /R: workshop quality, wheeled milled /TIN: as beside, titanium nitride coating

Quantity Art.No. EAN Set Packaging Number of HSS spiral drills PU
230312 4011923026417 19 Metal box 19 1
230312/R 4011923169152 19 Metal box 19 1
230312/TIN 4011923171230 19 Metal box 19 1
230314 4011923080334 25 Metal box 25 1
230314/R 4011923169169 25 Metal box 25 1
230314/TIN 4011923423964 25 Metal box 25 1

Tool frame „HUPstar” – open

Tool frame without star crimp, open design specifically for connectors

Quantity Art.No. EAN TL Compression shape Suitable for Construction/operation Inserts exchangeable Number of included inserts PU
213078 4011923589172 230 mm Universal (exchangeable inserts) Various applications Mechanical Yes 0 1

Cross slotted screwdrivers „HUPslim“ 1000 V Phillips

with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated
Screwdriver with reduced blade diameter and integrated protective insulation. Deep screwing can be achieved to a better standard thanks to the reduced blade diameter.

Quantity Art.No. EAN Isolation protection 1000 V Form Size Cutting length Grip design PU
102942 4011923606466 Yes PH 1 80 mm 2-components 1
102944 4011923606480 Yes PH 2 100 mm 2-components 1

Double ended spanners set acc. to DIN 3110

chrome vanadium steel, chrome plated, head polished, plastic holder included.

Content:
Art. no. 110130: each 1 pcs. 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22

Art. no. 110132: each 1 pcs. 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22- 21 x 23 - 24 x 26 - 25 x 28 - 27 x 32

Quantity Art.No. EAN Set Packaging Number of fork spanners PU
110130 4011923005238 8 Plastic box 8 1
110132 4011923051150 12 Plastic box 12 1

Stone chisels, flat oval shank

chrome vanadium air hardenend steel, golden varnishes

Quantity Art.No. EAN Length Cutting width Blade shape With hand protection Material thickness Material thickness I PU
180042 4011923013820 250 mm 28 mm Flat No 20 mm 12 mm 1
180044 4011923013837 300 mm 32 mm Flat No 23 mm 13 mm 1

Perlon fish tapes

made from stretched „Bayer-Perlon wire“, black, with solid steel end pieces, without additional pilot spring, strip size 4 mm

Quantity Art.No. EAN Length Diameter Application range Material PU
150232 4011923059262 10 m 4 Installation tube Plastic 1
150234 4011923059279 15 m 4 Installation tube Plastic 1
150236 4011923059286 20 m 4 Installation tube Plastic 1
150238 4011923059293 25 m 4 Installation tube Plastic 1
150239 4011923059309 30 m 4 Installation tube Plastic 1

MS-Polymer HUPfix

• High-Standard Glue and Sealant based on MS-Polymer
• UV-, Weather-, Sea-Water- and Chlorine-Resistant
• Food grade certificate
• Paintable

Quantity Art.No. EAN Application Curing process Colour Volume Packaging Transparent PU
170216 4011923573232 Construction/installation Cold Other 310 ml Cartridge Yes 1
170210 4011923573201 Construction/installation Cold Grey 310 ml Cartridge No 1
170212 4011923573218 Construction/installation Cold Black 310 ml Cartridge No 1
170214 4011923573225 Construction/installation Cold White 310 ml Cartridge No 1

Side cutters DIN ISO 5749

alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chrome plated, for soft wire and hard wire, leveraged, perfected cutting force performance.

Quantity Art.No. EAN Isolation protection 1000 V Length Strip function PU
210067 4011923138325 No 140 mm No 1
210068 4011923137892 No 160 mm No 1
210069 4011923592882 No 180 mm No 1

Soldering irons

with plastic handle, with schuko safety plug, replaceable copper tips, nickel-plated

Quantity Art.No. EAN Capacity Voltage Soldering tip Soldering tip replaceable Soldering tip shape Antistatic version Weight TL PU
160150 4011923060718 30 W 220 V 4 mm Yes Chamfered No 165 g 250 mm 1

Hydraulic hand-punch-cutter „HS-6“

Punches accurate slugs nearly free of burs. Usable for building and maintaining control boxes, for car retrofitting and for sanitary application.
Extent of supply: 1 hydraulic punching tool, 1 rod 3/8-24 UNF (art. 217660), 1 rod 3/4-16 UNF (art. 217662), 1 adapter (art. 217664), 1 sleeve (art. 217666), 1 plastic case with insert.

• Punching capacity: Steel plates up to max. 3 mm

• Pressing force: 60 kN
• Length: 230 mm
• Weight: 2,4 kg
• Weight Set: 3,8 kg

Quantity Art.No. EAN Punch force Type of excitation PU
217602 4011923546915 60 kN Hand hydraulic 1

Cable stripping knives

solid handle, shock-proof synthetic, blade with straight and rounded scraper

Quantity Art.No. EAN Isolation protection 1000 V Blade length Shape of blade Foldable PU
200010 4011923064679 No 60 mm Straight Yes 1

Universal pan head screw

Fibreboard screws, galvanised, pan head Pozidriv

Quantity Art.No. EAN Thread metric Length Material Surface protection Screwing system Drive PU
790090 4011923580766 3.5 25 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790091 4011923500498 3.5 30 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790093 4011923500504 3.5 40 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790100 4011923500511 4 30 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790101 4011923500528 4 35 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790102 4011923500535 4 40 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790103 4011923500542 4 45 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790104 4011923500559 4 50 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790111 4011923500566 4.5 40 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790112 4011923500573 4.5 45 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790113 4011923500580 4.5 50 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790118 4011923500597 5 30 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790120 4011923500603 5 40 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200
790121 4011923500610 5 50 mm Steel Galvanic/electrolytic zinc plated Pozidriv PZ 2 200

Dispenser box with uninsulated end sleeves

Contents: tín-plated end sleeves
700 pcs. 0.5 mm2, art. 270070
1000 pcs. 0.75 mm2, art. 270072
800 pcs. 1.0 mm2, art. 270076
500 pcs. 1.5 mm2, art. 270080
450 pcs. 2.5 mm2, art. 270088

Quantity Art.No. EAN Quantity connectors PU
270217 4011923088439 3450 1

Set HUPshrink31DW-A double-walled 3:1 with adhesive lining

Radiation cross-linked polyolefin, self extinguishing according to MV SS 302, flexible, universally applicable, Dielectric strength: 15 - 25 KV/mm according to DIN 53481, shrinking temperature > 80° C, continuous operating temperature - 55° C to 125° C, 25 pieces, in plastic box, double-walled, with adhesive lining

Quantity Art.No. EAN Shrink rate With inner glue With tool PU
267204 4011923586706 3:1 Yes No 1

Replacement rod

„Single Composite“, 4 mm green

Quantity Art.No. EAN Length Thread Diameter Application range Material PU
143501 4011923572235 20 m M5 4 Installation tube Plastic 1
143503 4011923572242 30 m M5 4 Installation tube Plastic 1

Cable cutter

• For cutting Cu/Al cables, fine and multi-wiring
• Chrome vanadium steel, dip-insulated handles
• Insulating function in upper head area
• Cable measuring function thanks to the 180 degree crossover of the legs
• Not for solid conductors
• Data, telephone and control cable, maximum Ø 12 mm
• Cu single wire, maximum 16 mm²
• Cu fine wire, maximum 35 mm²
• Cu multi-wire, maximum 25 mm²
• Al single wire, maximum 25 mm²
• Al multi-wire, maximum Ø 8 mm = 25 mm²

Quantity Art.No. EAN Isolation protection 1000 V max. wire cross sections Construction/operation TL PU
201087 4011923491642 No 35 mm² Mechanic one hand 200 mm 1

LED „Focus Torch“

• Adjustable focus for near and far
• LED 3 Watt CREE XP-E
• 3xAAA batteries

Quantity Art.No. EAN Model Battery type Lamp type Colour housing Material Length Rechargeable Number of batteries Batteries included PU
130312 4011923556426 Bar-shaped lamp Micro LED not exchangeable Black Aluminium 115 mm No 3 Yes 1

Self adhesive sockets

for cable ties and a quick and reliable fastening of line or cable bundles and other objects

Quantity Art.No. EAN Length Width for cable ties width Operating temperature Type of fastening Material Material quality PU
262161 4011923139490 19 mm 19 mm 3.6 mm -5 - 40 °C Self-adhesive Plastic Polyamide PA 100
262163 4011923139506 28 mm 28 mm 4.8 mm -5 - 40 °C Self-adhesive Plastic Polyamide PA 100

Battery powered crimping tool „SHs-6“

for interchangeable interchangeable dies, crimping head 180° swivelling, manual return flow after perfect pressure.
Extent of supply: 1 crimping tool, 1 charger, 1 battery, 1 strap, in light plastic box, without crimping headstock.
• Pressing force in kN: 60 kN
• Working pressure in bar: 700
• Head can be opened
• Pressing width: slim
• Cable lugs: standard Cu 10-240 • DIN Cu 10-185 • DIN Al 16-150
• Connectors: standard Cu 10-240 • DIN Cu 10-185 • DIN Al 16-150
• Pressing time, battery-operated in seconds: 5
• Battery charging time in minutes: 60
• Battery type: Li-Ion, 18 V, 2 Ah
• With battery item no. 215523 and charger item no. 215527
• Weight in kg without batterie: 2,1
• Weight of set in kg with batterie: 7,9

Quantity Art.No. EAN mm² TL Compression shape Suitable for Construction/operation Inserts exchangeable PU
215770-1 4011923608507 10 - 185 mm² 398 mm Hexagon Various applications Accumulator-hydraulic Yes 1

Crimping dies

for standard cable lugs and compacted cables, suitable for compacted cables WM pressing

Quantity Art.No. EAN Cross section Application PU
215004 4011923071820 10 Pipe cable lug and connectors 1
215006 4011923071837 16 Pipe cable lug and connectors 1
215008 4011923071844 25 Pipe cable lug and connectors 1
215010 4011923071851 35 Pipe cable lug and connectors 1
215012 4011923071868 50 Pipe cable lug and connectors 1

Connecting clamps PC

• Transparent connecting clamps, 2-8 pin, polycarbonate

Quantity Art.No. EAN Number of clamp positions Nominal cross section Colour Nominal voltage Nominal current Suitable for solid core PU
265014 4011923586812 3 1 - 2,5 mm² Transparent 450 V 24 A Yes 100

Engineers' screwdrivers Slot

with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, chrome plated

Quantity Art.No. EAN Isolation protection 1000 V Blade width Blade lendth TL Blade thickness Grip design PU
101640 4011923158200 No 5 mm 75 mm 170 mm 0.4 mm 2-components 1
101642 4011923158217 No 6 mm 100 mm 205 mm 1.2 mm 2-components 1
101644 4011923158224 No 7 mm 125 mm 230 mm 1.2 mm 2-components 1
101646 4011923158231 No 8 mm 150 mm 270 mm 1.2 mm 2-components 1
101648 4011923158248 No 9 mm 175 mm 295 mm 1.6 mm 2-components 1
101650 4011923158255 No 10 mm 200 mm 320 mm 1.6 mm 2-components 1

Battery powered crimping tool „SDE240-6M“

Technical data and scope of delivery, see 216669-1.

With the different colours of the sensor LED, it shows whether the pressing has been completed successfully or which errors have occurred:
Light is green: Pressing completed as standard, motor stopped.
Light is orange: Battery voltage not sufficient
Light is red: Pressing interrupted before completed

The device also has 1 white LED designed to illuminate the working area.

Quantity Art.No. EAN mm² TL Compression shape Suitable for Construction/operation PU
216669/M-1 4011923608729 10 - 240 mm² 455 mm Arbour clamping Cable lugs and connectors Accumulator-hydraulic 1

Crimping pliers

with locking device, with adjustable crimp pressure, chrome plated, square crimp (MC 3)

Quantity Art.No. EAN mm² Compression shape PU
211657 4011923518875 2.5 - 6 mm² Square compression 1

Hexagonal wood screws, hot zinc dipped

in accordance with DIN 571, hot zinc dipped, general requirements according to DIN 267 Part 1

Quantity Art.No. EAN Length Shaft diameter Material Surface protection Screwing system Head form Head Two-speed Hardened PU
790212/V 4011923534332 80 mm 6 mm Steel Hot dip galvanized Hexagon Cheese head 10 No Yes 25
790223/V 4011923534349 60 mm 8 mm Steel Hot dip galvanized Hexagon Cheese head 13 No Yes 25
790224/V 4011923534356 80 mm 8 mm Steel Hot dip galvanized Hexagon Cheese head 13 No Yes 25
790235/V 4011923534363 60 mm 10 mm Steel Hot dip galvanized Hexagon Cheese head 17 No Yes 10

Perlon fish tapes

made from stretched „Bayer-Perlon wire“, black, with solid steel end pieces, with 2 eyes, strip size 3 mm

Quantity Art.No. EAN Length Diameter Application range Material PU
150450 4011923139124 5 m 3 Installation tube Plastic 1
150452 4011923139131 10 m 3 Installation tube Plastic 1
150454 4011923139148 15 m 3 Installation tube Plastic 1
150456 4011923139155 20 m 3 Installation tube Plastic 1
150458 4011923139162 25 m 3 Installation tube Plastic 1
150462 4011923139186 5 m 4 Installation tube Plastic 1
150464 4011923139193 10 m 4 Installation tube Plastic 1
150466 4011923139209 15 m 4 Installation tube Plastic 1
150468 4011923139216 20 m 4 Installation tube Plastic 1
150470 4011923139223 25 m 4 Installation tube Plastic 1

Crimping dies

noninsulated crimping terminals, mandrel shape crimping, DIN 46234

Quantity Art.No. EAN Cross section Application Compression shape PU
215014 4011923133610 6 Pipe cable lug and connectors Arbour clamping 1
215016 4011923071936 10 Pipe cable lug and connectors Arbour clamping 1
215018 4011923071943 16 Pipe cable lug and connectors Arbour clamping 1
215020 4011923071950 25 Pipe cable lug and connectors Arbour clamping 1
215022 4011923071967 35 Pipe cable lug and connectors Arbour clamping 1
215024 4011923071974 6 - 35 Pipe cable lug and connectors Arbour clamping 1

Double ended ring spanners acc. to DIN 838

chrome vanadium steel, chrome plated, head polished, offset at 75°

Quantity Art.No. EAN Isolation protection 1000 V WS Cranked Length PU
110140 4011923051211 No 6 - 7 No 170 mm 1
110142 4011923051228 No 8 - 9 No 185 mm 1
110144 4011923051235 No 10 - 11 No 205 mm 1
110146 4011923051242 No 12 - 13 No 220 mm 1
110148 4011923051266 No 14 - 15 No 240 mm 1
110152 4011923051303 No 16 - 17 No 265 mm 1
110154 4011923051327 No 18 - 19 No 280 mm 1
110160 4011923051365 No 24 - 26 No 335 mm 1
110164 4011923051396 No 27 - 32 No 370 mm 1

Set HUPshrink21TW thin-walled 2:1 coloured

Radiation cross-linked polyolefin, self extinguishing according to MV SS 302, flexible, universally applicable, Dielectric strength: 15 - 25 KV/mm according to DIN 53481, shrinking temperature > 70° C, continuous operating temperature - 55° C to 125° C, 160 pieces, in plastic box, thin-walled

Quantity Art.No. EAN Shrink rate With inner glue With tool PU
267202 4011923586690 2:1 No No 1

Crimping pliers

with locking device, with adjustable crimp pressure, chrome plated, roll crimp (MC 4)

Quantity Art.No. EAN mm² Compression shape PU
211659 4011923518882 2.5 - 6 mm² Square compression 1

Crimping pliers HUPstar

for end sleeves, insulated crimp cable lugs and non-insulated crimp cable lugs DIN 46234. Crimping tool for industrial users, rotating precision impression die with parallel feed, dies can be exchanged, end sleeves 0.5 to 10 mm², insulated crimp cable lugs 0.1 to 6 mm², non-insulated crimp cable lugs 0.25 to 10 mm².

Pressing star 213086/E:
End sleeves: 0,5 / 0,75 / 1,5 / 2,5 / 4 / 6 / 10
Insulated crimp cable lugs: 0.1-0.25 / 0.5-1 / 1.5 / 2.5 / 4 / 6
Non-insulated crimp cable lugs 0.25 / 0.5 / 1 / 1.5 / 2.5 / 4 / 6 / 10

Quantity Art.No. EAN TL Compression shape Suitable for Construction/operation Inserts exchangeable PU
213086 4011923576233 230 mm Universal (exchangeable inserts) Various applications Mechanical Yes 1

Cross slotted screwdrivers Phillips

with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, chrome plated, engraving on the blade ensures extra grip in the screw

Quantity Art.No. EAN Isolation protection 1000 V Form Size Cutting length TL Grip design PU
101684 4011923158262 No PH 0 60 mm 145 mm 2-components 1
101686 4011923158279 No PH 1 80 mm 175 mm 2-components 1
101688 4011923158286 No PH 2 100 mm 205 mm 2-components 1
101690 4011923158293 No PH 3 150 mm 270 mm 2-components 1

Cable stripping knives

with black plastic scales, stainless blade with scraper

Quantity Art.No. EAN Isolation protection 1000 V Blade length Shape of blade Foldable PU
200011 4011923064686 No 60 mm Straight Yes 1

ABS plastic box „SysCon M“

outer dimensions: 464 x 353 x 212 mm
inner dimensions: 400 x 300 x 150 mm
without inlay

Quantity Art.No. EAN Model Material Set Width Height Depth Padlock shackle PU
220372 4011923555153 Tool box Plastic empty 400 mm 150 mm 300 mm Yes 1

Bulk storage chest for twist drills

HSS, DIN 338, 170 pieces, TYP N, short, ground, bright, with split point, TIN coated.

Contents:
1.0 - 10.0 mm (upstairs in 0.5 mm steps) up to 8,0 mm 10 pieces/size > 8,5 mm 5 pieces/size

Quantity Art.No. EAN Set Packaging Number of HSS spiral drills PU
230301/TIN 4011923164775 170 Metal box 170 1

Dispenser box with uninsulated end sleeves

Contents: tín-plated end sleeves
200 pcs. 4 mm2, art. 270094
100 pcs. 6.0 mm2, art. 270102
50 pcs. 10.0 mm2, art. 270108
50 pcs. 16.0 mm2, art. 270114

Quantity Art.No. EAN Quantity connectors PU
270218 4011923088446 395 1

Connecting clamps PC

• Transparent connecting clamps, 2-8 pin, polycarbonate

Quantity Art.No. EAN Number of clamp positions Nominal cross section Colour Nominal voltage Nominal current Suitable for solid core PU
265015 4011923586829 4 1 - 2,5 mm² Transparent 450 V 24 A Yes 100

Soldering irons

soldering tip internally heated, chrome vanadium steel tube, with plastic handle, with schuko safety plug, replaceable nickel-plated copper tips, for electronic work

Quantity Art.No. EAN Capacity Voltage Soldering tip Soldering tip replaceable Soldering tip shape Antistatic version Weight TL PU
160190 4011923060879 15 W 220 V 2.5 mm Yes Chamfered No 80 g 200 mm 1

Battery powered crimping tool „SHs-6M“

Technical data and scope of delivery, see 215770-1.

With the different colours of the sensor LED, it shows whether the pressing has been completed successfully or which errors have occurred:
Light is green: Pressing completed as standard, motor stopped.
Light is orange: Battery voltage not sufficient
Light is red: Pressing interrupted before completed

The device also has 1 white LED designed to illuminate the working area.

Quantity Art.No. EAN mm² TL Compression shape Suitable for Construction/operation Inserts exchangeable PU
215770/M-1 4011923608521 10 - 185 mm² 398 mm Hexagon Cable lugs and connectors Accumulator-hydraulic Yes 1

Guiding head with loop M5

guiding head Ø 6 mm

Quantity Art.No. EAN Thread Diameter Application range Material PU
143508 4011923576202 M5 6 Installation tube Metal 1

Construction Adhesive HUPmount

• Viscoelastic Filler and Adhesive for high strengh Connections
• Solvent- and Silicone-Free
• Construct, Dowels, Fill, Bonding and Gluing
• Paintable

Quantity Art.No. EAN Application Curing process Colour Volume Packaging Transparent PU
170208 4011923573195 Construction/installation Cold Grey 310 ml Cartridge No 1

LED „IP67 Torch“

• IP67, dust-tight, protected against brief submersion (water-tight)
• 1 x switch operation 100 % lighting performance 2 x switch operation 30 % lighting performance
• LED 5 Watt CREE XP-G
• 4xAAA batteries

Quantity Art.No. EAN Model Battery type Lamp type Colour housing Material Length Rechargeable Number of batteries Batteries included PU
130314 4011923556433 Bar-shaped lamp Micro LED not exchangeable Black Aluminium 141 mm No 4 Yes 1

End sleeves

• of electrolytic copper, tin-plated
• Dimensions to DIN 46228, Part 1

Quantity Art.No. EAN CSS I Colour TL d1 d2 s1 PU
270066 4011923086923 0.25 mm² 5 mm None 5 mm 0.75 mm 1.7 0.15 mm 0
270066/500 4011923086930 0.25 mm² 5 mm None 5 mm 0.75 mm 1.7 0.15 mm 500
270068 4011923086947 0.34 mm² 5 mm None 5 mm 0.85 mm 1.8 0.15 mm 0
270068/500 4011923086954 0.34 mm² 5 mm None 5 mm 0.85 mm 1.8 0.15 mm 500
270070 4011923086961 0.5 mm² 6 mm None 6 mm 1 mm 2.1 0.15 mm 0
270070/500 4011923086978 0.5 mm² 6 mm None 6 mm 1 mm 2.1 0.15 mm 500
270071 4011923481766 0.5 mm² 10 mm None 10 mm 0
270072 4011923086985 0.75 mm² 6 mm None 6 mm 1.2 mm 2.3 0.15 mm 0
270072/500 4011923086992 0.75 mm² 6 mm None 6 mm 1.2 mm 2.3 0.15 mm 500
270073 4011923481735 0.5 mm² 8 mm None 8 mm 0
270074 4011923087005 0.75 mm² 12 mm None 12 mm 1.2 mm 2.3 0.15 mm 0
270074/500 4011923087029 0.75 mm² 12 mm None 12 mm 1.2 mm 2.3 0.15 mm 500
270076 4011923087036 1 mm² 6 mm None 6 mm 1.4 mm 2.5 0.15 mm 0
270076/500 4011923087043 1 mm² 6 mm None 6 mm 1.4 mm 2.5 0.15 mm 500
270077 4011923481742 1 mm² 8 mm None 8 mm 1.4 mm 2.5 0.15 mm 0
270077/100 4011923582913 100
270078 4011923087050 1 mm² 10 mm None 10 mm 1.4 mm 2.5 0.15 mm 0
270078/500 4011923087067 1 mm² 10 mm None 10 mm 1.4 mm 2.5 0.15 mm 500
270079 4011923087074 1 mm² 12 mm None 12 mm 1.4 mm 2.5 0.15 mm 0
270079/500 4011923087098 1 mm² 12 mm None 12 mm 1.4 mm 2.5 0.15 mm 500
270080 4011923087104 1.5 mm² 7 mm None 7 mm 1.7 mm 2.8 0.15 mm 0
270080/500 4011923087111 1.5 mm² 7 mm None 7 mm 1.7 mm 2.8 0.15 mm 500
270081/500 4011923178390 1.5 mm² 8 mm None 8 mm 500
270082 4011923087128 1.5 mm² 10 mm None 10 mm 1.7 mm 2.8 0.15 mm 0
270082/500 4011923087135 1.5 mm² 10 mm None 10 mm 1.7 mm 2.8 0.15 mm 500
270084 4011923087142 1.5 mm² 12 mm None 12 mm 1.7 mm 2.8 0.15 mm 0
270084/500 4011923087166 1.5 mm² 12 mm None 12 mm 1.7 mm 2.8 0.15 mm 500
270086 4011923087173 1.5 mm² 18 mm None 18 mm 1.7 mm 2.8 0.15 mm 0
270086/500 4011923087180 1.5 mm² 18 mm None 18 mm 1.7 mm 2.8 0.15 mm 500
270087 4011923087197 1.5 mm² 20 mm None 20 mm 1.7 mm 2.8 0.15 mm 0
270088 4011923087210 2.5 mm² 7 mm None 7 mm 2.2 mm 3.4 0.15 mm 0
270088/500 4011923087227 2.5 mm² 7 mm None 7 mm 2.2 mm 3.4 0.15 mm 500
270089 4011923087234 2.5 mm² 10 mm None 10 mm 2.2 mm 3.4 0.15 mm 0
270089/500 4011923087241 2.5 mm² 10 mm None 10 mm 2.2 mm 3.4 0.15 mm 500
270090 4011923087258 2.5 mm² 12 mm None 12 mm 2.2 mm 3.4 0.15 mm 0
270090/500 4011923087265 2.5 mm² 12 mm None 12 mm 2.2 mm 3.4 0.15 mm 500
270091 4011923087272 2.5 mm² 15 mm None 15 mm 2.2 mm 3.4 0.15 mm 0
270091/500 4011923087289 2.5 mm² 15 mm None 15 mm 2.2 mm 3.4 0.15 mm 500
270092 4011923087296 2.5 mm² 18 mm None 18 mm 2.2 mm 3.4 0.15 mm 0
270092/500 4011923087302 2.5 mm² 18 mm None 18 mm 2.2 mm 3.4 0.15 mm 500
270093 4011923087319 2.5 mm² 20 mm None 20 mm 2.2 mm 3.4 0.15 mm 0
270093/500 4011923087326 2.5 mm² 20 mm None 20 mm 2.2 mm 3.4 0.15 mm 500
270094 4011923087333 4 mm² 9 mm None 9 mm 2.8 mm 4 0.2 mm 0
270094/500 4011923087340 4 mm² 9 mm None 9 mm 2.8 mm 4 0.2 mm 500
270096 4011923087371 4 mm² 12 mm None 12 mm 2.8 mm 4 0.2 mm 0
270096/500 4011923087388 4 mm² 12 mm None 12 mm 2.8 mm 4 0.2 mm 500
270097 4011923087395 4 mm² 15 mm None 15 mm 2.8 mm 4 0.2 mm 0
270097/500 4011923087401 4 mm² 15 mm None 15 mm 2.8 mm 4 0.2 mm 500
270098 4011923087418 4 mm² 18 mm None 18 mm 2.8 mm 4 0.2 mm 0
270098/500 4011923087425 4 mm² 18 mm None 18 mm 2.8 mm 4 0.2 mm 500
270100 4011923087456 6 mm² 10 mm None 10 mm 3.5 mm 4.7 0.2 mm 250
270102 4011923087463 6 mm² 12 mm None 12 mm 3.5 mm 4.7 0.2 mm 250
270104 4011923087470 6 mm² 15 mm None 15 mm 3.5 mm 4.7 0.2 mm 250
270106 4011923087487 6 mm² 18 mm None 18 mm 3.5 mm 4.7 0.2 mm 250
270107 4011923087494 6 mm² 20 mm None 20 mm 3.5 mm 4.7 0.2 mm 250
270108 4011923087500 10 mm² 12 mm None 12 mm 4.5 mm 5.8 0 mm 250
270110 4011923087517 10 mm² 15 mm None 15 mm 4.5 mm 5.8 0.2 mm 250
270112 4011923087531 10 mm² 18 mm None 18 mm 4.5 mm 5.8 0.2 mm 250
270113 4011923149680 250
270114 4011923087548 16 mm² 12 mm None 12 mm 5.8 mm 7.5 0.2 mm 250
270116 4011923087555 16 mm² 15 mm None 15 mm 5.8 mm 7.5 0.2 mm 250
270118 4011923087579 16 mm² 18 mm None 18 mm 5.8 mm 7.5 0.2 mm 250
270119 4011923087586 16 mm² 24 mm None 24 mm 5.8 mm 7.5 0.2 mm 250
270120 4011923087593 25 mm² 12 mm None 12 mm 7.3 mm 9.5 0.2 mm 250
270121 4011923087609 25 mm² 15 mm None 15 mm 7.3 mm 9.5 0.2 mm 250
270122 4011923087616 25 mm² 18 mm None 18 mm 7.3 mm 9.5 0.2 mm 250
270123 4011923087623 25 mm² 25 mm None 25 mm 7.3 mm 9.5 0.2 mm 100
270124 4011923087630 35 mm² 18 mm None 18 mm 8.3 mm 11 0.2 mm 100
270126 4011923087654 35 mm² 22 mm None 22 mm 8.3 mm 11 0.2 mm 100
270128 4011923087661 35 mm² 25 mm None 25 mm 8.3 mm 11 0.2 mm 100
270130 4011923087678 35 mm² 30 mm None 30 mm 8.3 mm 11 0.2 mm 100
270131 4011923087685 50 mm² 22 mm None 22 mm 10.3 mm 13 0.3 mm 100
270132 4011923087692 70 mm² 25 mm None 25 mm 12.5 mm 15 0.4 mm 100
270133 4011923481773 50 mm² 18 mm None 18 mm 100
270134 4011923087708 95 mm² 30 mm None 30 mm 14.5 mm 17 0.4 mm 50
270135 4011923087715 120 mm² 32 mm None 32 mm 16.5 mm 19 0.5 mm 50
270136 4011923087722 150 mm² 38 mm None 38 mm 18.5 mm 21 0.5 mm 50
270137 4011923087739 185 mm² 40 mm None 40 mm 20 mm 23.5 0.6 mm 25

Tool case “Start VDE“

Content:
• 2C-VDE telephone pliers, 200 mm
• 2C-VDE combination pliers, 180 mm
• 2C-VDE cutters, 160 mm
• 2C-VDE wire stripping pliers, 160 mm
• 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• Cable knife, 1 blade
• Electricians’ chisel, 10 x 250 mm
• VDE/GS Voltage tester - blade 50 mm
• PUK pocket saw, fixed handle
• Brush
• Stone chisel, 300 mm
• Engineers’ hammer, 300 g
• Double-face sledge hammer, 1000 g
• Spatula, 40 mm
• Plaster container

Quantity Art.No. EAN Set Packaging Tool case PU
220168/VDE 4011923502225 21 Bag 220060 1

Cable glands IP 68, metric or PG, fully mounted

material: polyamide 6.6, (gland body: PA 6.6, halogen free, seal: TPR, halogen free, washer: PVC), colour: light- grey or black, temperature range: – 40°C to + 85°C, vibration protection: integrated anti- twist protection for vibration- firm assembly, fire class: according to UL 94 V–2, protection category: IP68, properties: integrated strain relief; easy to install, completely assembled as shown

Quantity Art.No. EAN Thread type Nominal thread size metric/PG Colour WS Degree of protection (IP) Material Material quality Pitch thread D2 D1 B1 L1 L2 KB PU
250060 4011923497019 PG 7 Light grey 15 IP68 Plastic Polyamide 1.5 mm 8.3 mm 12.5 mm 6.9 mm 7.9 mm 20 mm 3.5 - 6 10
250062 4011923497026 PG 9 Light grey 19 IP68 Plastic Polyamide 1.5 mm 10.5 mm 15.2 mm 8 mm 7.9 mm 22 mm 4 - 8 10
250064 4011923497033 PG 11 Light grey 22 IP68 Plastic Polyamide 1.5 mm 13.2 mm 18.3 mm 10.5 mm 7.9 mm 23.7 mm 5 - 10 10
250066 4011923497040 PG 13.5 Light grey 24 IP68 Plastic Polyamide 1.5 mm 15.5 mm 20.4 mm 12 mm 8.9 mm 24.6 mm 6 - 12 10
250068 4011923497057 PG 16 Light grey 27 IP68 Plastic Polyamide 1.5 mm 17.2 mm 22.5 mm 14 mm 9.8 mm 26.2 mm 10 - 14 10
250070 4011923497064 PG 21 Light grey 33 IP68 Plastic Polyamide 1.5 mm 22.4 mm 28.3 mm 18.4 mm 10.8 mm 30 mm 13 - 18 10
250072 4011923497071 PG 29 Light grey 42 IP68 Plastic Polyamide 1.5 mm 30.6 mm 37 mm 25 mm 10.8 mm 35 mm 18 - 25 10
250074 4011923497088 PG 36 Light grey 53 IP68 Plastic Polyamide 1.5 mm 35.3 mm 47 mm 35.5 mm 14.5 mm 42.3 mm 22 - 32 5
250076 4011923497095 PG 42 Light grey 60 IP68 Plastic Polyamide 1.5 mm 40 mm 54 mm 40 mm 14.5 mm 44 mm 30 - 38 5
250078 4011923497101 PG 48 Light grey 65 IP68 Plastic Polyamide 1.5 mm 43.2 mm 59.3 mm 46 mm 15.6 mm 42.7 mm 34 - 44 5

Heavy duty side cutters DIN ISO 5749

alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chrome plated, for soft wire and hard wire.

Quantity Art.No. EAN Isolation protection 1000 V Length Strip function PU
210156 4011923137908 No 160 mm No 1
210157 4011923137915 No 180 mm No 1

Cross slotted screwdrivers „HUPslim“ 1000 V Pozidriv

with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated
Screwdriver with reduced blade diameter and integrated protective insulation. Deep screwing can be achieved to a better standard thanks to the reduced blade diameter.

Quantity Art.No. EAN Isolation protection 1000 V Form Size Cutting length Grip design PU
102952 4011923606503 Yes PZ 1 80 mm 2-components 1
102954 4011923606527 Yes PZ 2 100 mm 2-components 1

Perlon fish tapes

made from stretched „Bayer-Perlon wire“, black, with solid steel end pieces, with 2 spring and 2 eyes, strip size 4 mm

Quantity Art.No. EAN Length Diameter Application range Material PU
150476 4011923139278 10 m 4 Installation tube Plastic 1
150478 4011923139285 15 m 4 Installation tube Plastic 1
150480 4011923139292 20 m 4 Installation tube Plastic 1
150482 4011923139308 25 m 4 Installation tube Plastic 1

Dry wall screws

galvanised, counter-sunk head, Tx

Quantity Art.No. EAN Thread metric Length Material Surface protection Head form Screwing system Drive PU
790920 4011923532147 4 32 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 20 200
790922 4011923532154 4 41 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 20 200

Cross slotted screwdrivers Pozidriv

with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, chrome plated

Quantity Art.No. EAN Isolation protection 1000 V Form Size Cutting length TL Grip design PU
102612 4011923158729 No PZ 1 80 mm 175 mm 2-components 1
102614 4011923158736 No PZ 2 100 mm 205 mm 2-components 1
102616 4011923158743 No PZ 3 150 mm 270 mm 2-components 1

Cable pulling device HAUPA PullTec

with special plastic coating, M5 thread and probe, in durable plastic housing, colour: black

„Single Composite“, 5,2 mm black

The advantages of the HAUPA PullTec at a glance:
• Material: Coated with a special plastic
• Slides very well and is highly elastic
• Low friction • Does not break or bend
• M5 thread • With probe
• In durable plastic housing • Breaking load: 350 kg

Quantity Art.No. EAN Length Thread Diameter Application range Material PU
143504 4011923556259 20 m M5 5.2 Installation tube Plastic 1
143506 4011923556266 30 m M5 5.2 Installation tube Plastic 1

Torch brazing set SolderingKit

12-pieces, for pocket lighter butane gas, for operation without disruptive cables, where electrical power is impossible, replaceable attachments for heat shrinking work, micro-welding and cutting plastic film and panels, with Piezo ignition, heating time: +/- 25 seconds (peak), performance can be infinitely regulated, temperatures with naked flame up to bis 1200 °C, brazing up to 550 °C, heat shrinking up to 680 °C, burn time approximately 60 minutes, in black plastic case.

Content:
• Torch brazing piston
• Sealing cap
• Solder dispenser
• Flame nozzle 3.5 mm ø for micro-welding
• Hot knife 12.5 mm blade width for cutting and shaping plastic and hard foams
• Solder tip 3 mm, angled on one side (ellipsis shaped)
• Solder tip 3.5 mm angled on both sides (chisel shaped)
• Heat reflector for heat shrinking
• Wrench 7 mm for mounting solder tip
• Wrench 8 mm for mounting solder tip
• Cleaning sponge with sponge case 40 x 40 mm
• Solder tip with pencil tip

Quantity Art.No. EAN Nominal power Warm-up period Operating time with gas charge Ignition Max. temperature Soldering tip shape Type of soldering tip Weight PU
262098 4011923591571 10 - 60 W 20 s 60 min Piezo 1200 °C Set Continuous soldering tip 670 g 1

Holster for LED torches

Suitable for item numbers: 130312, 130314

Quantity Art.No. EAN Model Material Width Height Depth PU
130322 4011923556471 Bag Fabric 30 mm 100 mm 10 mm 1

Tool case “Start-up VDE”

Contents:
• 2C-VDE electrician‘s screwdrivers
2,5 x 75, 4 x 100, 5,5 x 125 und 6,5 x 150 mm
• 2C-VDE cross slotted screwdrivers, PH, size 1 + 2
• 2C-VDE combination pliers 185 mm
• 2C-VDE side cutters 165 mm
• 2C-VDE telephone pliers 200 mm
• 2C-VDE wire stripping pliers 160 mm
• Wire stripper, hooked blade, 8 - 28 mm Ø
• Cable knife, 1-pieces
• Engineers’ hammer, 300 g
• PUK pocket saw, fixed handle
• Electricians’ chisel, 10 x 250 mm
• Paint scraper, 40 mm
• Voltage tester, blade 50 mm
• Measuring tape,
• Water brushes

Quantity Art.No. EAN Set Packaging Tool case PU
220235 4011923450458 19 Case 220031 1

Dispenser box with insulated end sleeves (DIN)

Contents: Colour range III, DIN
50 pcs. white, 0.5 mm2, art. 270800
100 pcs. grey, 0.75 mm2, art. 270802
100 pcs. red, 1.0 mm2, art. 270804
100 pcs. black, 1.5 mm2, art. 270807
50 pcs. blue, 2.5 mm2, art. 270810

Quantity Art.No. EAN Quantity connectors Insulation PU
270854 4011923096687 400 Nylon 5

Cable ties

material: nylon - colour transparent, all other data and properties like No. 262500 - 46, big packing unit 1000 pcs.

Quantity Art.No. EAN Length belt/tape/tie Band width Max. bundle diameter Min. holding force Colour Material Operating temperature Mounting temperature Material quality PU
262501 4011923098575 96 mm 2.5 mm 23 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 0
262503 4011923098599 100 mm 2.5 mm 25 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 0
262505 4011923098612 142 mm 2.5 mm 35 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 0
262507 4011923098636 203 mm 2.5 mm 55 mm 8 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 0
262509 4011923098650 142 mm 3.2 mm 35 mm 18 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 0
262511 4011923098674 290 mm 3.6 mm 82 mm 18 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 0
262513 4011923098698 188 mm 4.8 mm 54 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 0
262517 4011923098728 199 mm 4.8 mm 54 mm 216 N Natural colour Plastic -40 - 85 °C -5 - 85 °C Polyamide PA 0

Crimping dies

noninsulated crimping terminals, mandrel shape crimping, DIN 46234

Quantity Art.No. EAN Cross section Application Compression shape PU
215026 4011923071981 10 Insulated cable connections Oval pressing 1
215028 4011923071998 16 Insulated cable connections Oval pressing 1

HUPsilicon

• Suitable for Internal and External Expansion Grooves
• In Accordance to DIN 18545 Part 2
• Aging-, Weather- and UV-Resistant, Permanent Elastic

Quantity Art.No. EAN Model Colour Volume Packaging PU
170200 4011923573157 Silicone-based Transparent 310 ml Cartridge 1
170202 4011923573164 Silicone-based White 310 ml Cartridge 1

Cable glands IP 68, metric or PG, fully mounted

material: polyamide 6.6, (gland body: PA 6.6, halogen free, seal: TPR, halogen free, washer: PVC), colour: light- grey or black, temperature range: – 40°C to + 85°C, vibration protection: integrated anti- twist protection for vibration- firm assembly, fire class: according to UL 94 V–2, protection category: IP68, properties: integrated strain relief; easy to install, completely assembled as shown

Quantity Art.No. EAN Thread type Nominal thread size metric/PG Colour WS Degree of protection (IP) Material Material quality Pitch thread D2 D1 B1 L1 L2 KB PU
250100 4011923497217 PG 7 Black 15 IP68 Plastic Polyamide 1.5 mm 8.3 mm 12.5 mm 6.9 mm 7.9 mm 20 mm 3.5 - 6 10
250102 4011923497224 PG 9 Black 19 IP68 Plastic Polyamide 1.5 mm 10.5 mm 15.2 mm 8 mm 7.9 mm 22 mm 4 - 8 10
250104 4011923497231 PG 11 Black 22 IP68 Plastic Polyamide 1.5 mm 13.2 mm 18.3 mm 10.5 mm 7.9 mm 23.7 mm 5 - 10 10
250106 4011923497248 PG 13.5 Black 24 IP68 Plastic Polyamide 1.5 mm 15.5 mm 20.4 mm 12 mm 8.9 mm 24.6 mm 6 - 12 10
250108 4011923497255 PG 16 Black 27 IP68 Plastic Polyamide 1.5 mm 17.2 mm 22.5 mm 14 mm 9.8 mm 26.2 mm 10 - 14 10
250110 4011923497262 PG 21 Black 33 IP68 Plastic Polyamide 1.5 mm 22.4 mm 28.3 mm 18.4 mm 10.8 mm 30 mm 13 - 18 10
250112 4011923497279 PG 29 Black 42 IP68 Plastic Polyamide 1.5 mm 30.6 mm 37 mm 25 mm 10.8 mm 35 mm 18 - 25 10
250114 4011923497286 PG 36 Black 53 IP68 Plastic Polyamide 1.5 mm 35.3 mm 47 mm 35.5 mm 14.5 mm 42.3 mm 22 - 32 5
250116 4011923497293 PG 42 Black 60 IP68 Plastic Polyamide 1.5 mm 40 mm 54 mm 40 mm 14.5 mm 44 mm 30 - 38 5
250118 4011923497309 PG 48 Black 65 IP68 Plastic Polyamide 1.5 mm 43.2 mm 59.3 mm 46 mm 15.6 mm 42.7 mm 34 - 44 5

Set HUPshrink21TW thin-walled 2:1 coloured

Radiation cross-linked polyolefin, self extinguishing according to MV SS 302, flexible, universally applicable, Dielectric strength: 15 - 25 KV/mm according to DIN 53481, shrinking temperature > 70° C, continuous operating temperature - 55° C to 125° C, 160 pieces, in plastic box, thin-walled

Quantity Art.No. EAN Shrink rate With inner glue With tool PU
267206 4011923586713 2:1 No No 1

Heavy duty side cutters DIN ISO 5749

alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chrome plated, for soft wire and hard wire, leveraged, perfected cutting force performance.

Quantity Art.No. EAN Isolation protection 1000 V Length Strip function PU
210158 4011923137939 No 200 mm No 1

Crimping pliers HUPstar

for end sleeves and open brass cable lugs. Crimping pliers for industrial users, rotating precision impression die with parallel feed, dies changeable dies, core cable ends from 0.14 to 16 mm², open non-insulated brass cable shoes 0.14 to 6 mm²

Pressing star 213080/E:
End sleeves:
0.14-0.25 / 0.25-0.5 / 1 / 1.5 / 2.5 / 4 / 6 / 10 / 16
Open non-insulated brass cable lugs:
0.14-0.25 / 0.25-0.5 / 1 / 1.5 / 2.5 / 2.54 / 6

Quantity Art.No. EAN TL Compression shape Suitable for Construction/operation Inserts exchangeable PU
213080 4011923574833 230 mm Universal (exchangeable inserts) Various applications Mechanical Yes 1

Connecting clamps PC

• Transparent connecting clamps, 2-8 pin, polycarbonate

Quantity Art.No. EAN Number of clamp positions Nominal cross section Colour Nominal voltage Nominal current Suitable for solid core PU
265016 4011923586836 5 1 - 2,5 mm² Transparent 450 V 24 A Yes 100

Crimpset „MULTI Photovoltaik“

Innovative crimping tool with rapid change system
- one tool for almost all crimping applications

Contents of set: Crimping plier Multi (211962)
Crimping dies for „Multi - Contact“ connectors MC3
2,5 + 4 + 6 mm², AWG 13/11/10
Crimping dies for „Multi - Contact“ connectors MC4
2,5 + 4 + 6 mm², AWG 13/11/10

Other advantages:
• Screw less fast change system for crimping dies
• Single hand operation with expenditure energy
• With ratchet and built-in safety release, guarantees proper electrical connection
• Adjustable crimp pressure
• Chrome plated tool frame
• Additional purchase of other crimping dies possible
• Handy box protects pliers and dies

Quantity Art.No. EAN Compression shape Suitable for Construction/operation PU
212005 4011923518783 Universal (exchangeable inserts) Various applications Mechanical 1

Double ended ring spanners set acc. to DIN 838

chrome vanadium steel, chrome plated, head polished, in paper box.

Content:
Art. no. 110170: each 1 pcs. 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22

Art. no. 110172: each 1 pcs 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22- 21 x 23 - 24 x 26 - 25 x 28 - 27 x 32

Quantity Art.No. EAN Set Packaging Number of ring spanners PU
110170 4011923005498 8 Carton 8 1
110172 4011923051419 12 Carton 12 1

Cable stripping knives

with wooden scales, blade with scraper

Quantity Art.No. EAN Isolation protection 1000 V Blade length Shape of blade Foldable PU
200012 4011923016968 No 60 mm Straight Yes 1

ABS plastic box „SysCon XL“

outer dimensions: 464 x 335 x 362 mm
inner dimensions: 400 x 300 x 312 mm

without inlay

Quantity Art.No. EAN Model Material Width Height Depth Padlock shackle PU
220650 4011923572518 Tool box Plastic 400 mm 312 mm 300 mm Yes 1

Crimping pliers HUPstar Coax

for coaxial connectors. Crimp pliers for industrial users, revolving precision impression dies with parallel feed, changeable dies.

Pressing star 213082/E
Coax:
Hexagon crimp, BNC, TNC, SNB, SNC, SMS, SMA, MCX, 1.07 to 10.9 mm

Quantity Art.No. EAN TL Compression shape Suitable for Construction/operation Inserts exchangeable PU
213082 4011923574840 230 mm Universal (exchangeable inserts) Various applications Mechanical Yes 1

Crimping pliers HUPstar Photovoltaic

for photovoltaic connectors. Crimp pliers for industrial users, revolving precision impression dies with parallel feed, changeable dies.

Pressing star 213084/E
Photovoltaics:
Amphenol Helios H4: 2.5 / 2.5 / 6
Multi-Contact MC3: 2.5 / 2.5 / 6
Multi-Contact MC4: 2.5 / 2.5 / 6 Tyco
Solarlok: 1.5 / 1.5 / 4.6

Quantity Art.No. EAN mm² TL Compression shape Suitable for Construction/operation Inserts exchangeable PU
213084 4011923574857 1.5 - 6 mm² 230 mm Universal (exchangeable inserts) Various applications Mechanical Yes 1
213084/E 4011923580964 1.5 - 6 mm² Universal (exchangeable inserts) Various applications Mechanical 1

Connecting clamps PC

• Transparent connecting clamps, 2-8 pin, polycarbonate

Quantity Art.No. EAN Number of clamp positions Nominal cross section Colour Nominal voltage Nominal current Suitable for solid core PU
265017 4011923586843 8 1 - 2,5 mm² Transparent 450 V 24 A Yes 100

Chipboard screw countersunk „TwinSpeed“

Chipboard screw, galvanised, counter-sunk head, Tx, double helix thread, considerably shortened screw-in times when compared to traditional screws thanks to the double start thread. Uses: Wood, plywood, plasterboard, rawlplugs

Quantity Art.No. EAN Thread metric Length Material Surface protection Head form Screwing system Drive PU
793005 4011923527020 2.9 16 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 10 200
793006 4011923527037 2.9 25 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 10 100
793007 4011923527044 2.9 32 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 10 100
793008 4011923527051 2.9 38 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 10 100
793027 4011923527068 3.9 32 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 15 100
793029 4011923527075 3.9 38 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 15 100
793030 4011923527082 3.9 45 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 15 100
793031 4011923527099 3.9 50 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 15 100
793040 4011923527105 4.2 32 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 20 100
793041 4011923527112 4.2 38 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 20 100
793043 4011923527129 4.2 50 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 20 100
793051 4011923527327 4.8 30 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 25 100
793053 4011923527334 4.8 38 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 25 100
793054 4011923527136 4.8 50 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 25 100
793055 4011923527143 4.8 60 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 25 100
793064 4011923527174 6.3 60 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 30 50
793065 4011923527181 6.3 80 mm Steel Galvanic/electrolytic zinc plated Countersunk Torx 30 50

Combination spanners similar to DIN 3113

chrome vanadium steel, chrome plated, head polished, offset at 15°

Quantity Art.No. EAN WS Low spark model TL PU
110180 4011923051457 6 mm No 100 mm 1
110182 4011923051464 7 mm No 110 mm 1
110184 4011923051471 8 mm No 120 mm 1
110186 4011923051488 9 mm No 130 mm 1
110188 4011923051495 10 mm No 140 mm 1
110190 4011923051501 11 mm No 150 mm 1
110192 4011923051518 12 mm No 160 mm 1
110194 4011923051525 13 mm No 170 mm 1
110196 4011923051532 14 mm No 180 mm 1
110198 4011923051549 15 mm No 190 mm 1
110202 4011923051563 17 mm No 210 mm 1
110204 4011923051570 18 mm No 220 mm 1
110206 4011923051587 19 mm No 230 mm 1
110212 4011923051617 22 mm No 260 mm 1
110216 4011923051631 24 mm No 280 mm 1
110222 4011923051662 27 mm No 310 mm 1

Screwdrivers Tx

with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, chrome plated with black point

Quantity Art.No. EAN Isolation protection 1000 V Form Size TX Blade length TL Grip design PU
101229/6 4011923158842 No TX 6 100 mm 185 mm 2-components 1
101230 4011923158859 No TX 8 100 mm 185 mm 2-components 1
101200 4011923158750 No TX 9 100 mm 185 mm 2-components 1
101202 4011923158767 No TX 10 100 mm 195 mm 2-components 1