Tool bag made of 600D polyester

• Dimensions 510 x 320 x 250 mm
• Spacious open main compartment with metal carrying bar and anti-slip grip
• Outside: 7 x open storage pockets and 1 x pocket with Velcro closure
• Inside: 4 x open storage pockets, 2 x polyester storage straps & 2 x metal measuring tape
• Adjustable and detachable shoulder strap
• Large removable protective cover with velcro fastening
• Removable belt pouch with 4 compartments for tool organization

Tool bag made of 600D Polyester, with inner and outer tool compartments, with carrier bar of metal and anti-slip grip, removeable protective cover made of polyester, removeable belt pouch, ToolBag 220704.

• VDE Screwdriver set HUPslim 1000 V, Phillips, 6 pcs. Content: 2C-VDE electricians’ screwdrivers HUPslim 3,5 x 0,6 x 100 mm | 4 x 0,8 x 100 mm | 5,5 x 1,0 x 125 mm | 6,5 x 1,2 x 150 mm, 1 VDE-Cross slotted screwdrivers HUPslim PH, size 1 + 2
• 2C-VDE electricians’ screwdrivers HUPslim 4 x 1,0 x 100 mm
• VDE screwdrivers HUPslim PZ/FL 1 + 2
• VDE combination pliers 180 mm*
• VDE side cutters 160 mm*
• VDE long chain nose pliers 200 mm*
• VDE cable cutter 160 mm
• Stripper “Allrounder“ 4 – 15 mm²
• Stripper “Top Coax Plus“ 4,8 – 7,5 mm²
• Perlon fish tapes, 15 m x 3 mm
• 100 x connecting clamps PC, 5-pole, 1 – 2,5 mm²
• PU textile gloves Level 5, size 10
• Spanners for switch-cabinet “HUPkey“
• LED “Pen Torch“
• Folding rules 2 m
• Aluminium spirit levels 400 mm
• Carpenters‘ pencils
• Water brushes
• Plaster cups
• Paint scrapers 50 mm
• Stone chisels 32 x 300 mm
• Engineers‘ hammer 300 g
• Sledge hammer 1000 g
• Utility metal knives
• Hacksaw 300 mm
• SDS-hammer drill sets
• Contact spray HUPwetBlock
• Industrial cleaning wipes
• Electricians’ chisels 10 x 250 mm

Tool bag made of 600D Polyester

• compact design and low weight
• with inner and outer tool compartments
• rubber-reinforced base as protection against dirt and moisture
• double cross-seam for heavy loads
• carrier bar of metal, for high wearing comfort
• removeable carrying strap, padded
• additional pockets of polyester with hook of metal and velcro fastening
• Material: extra strong 600D Polyester, water resistant and dirt-repellent
• colour: green, black"

Tool bag made of 600D Polyester, with inner and outer tool compartments, with padded carrying strap, rubber-reinforced base, double cross-seam for heavy loads.

Content:

• Automatic wire stripper “Super Plus“ 0,2 – 6 mm²

• 2C-VDE electricians’ screwdrivers HUPslim 4 x 100 mm, blade thickness 0,8 and 1,0 mm

• 2C-VDE electricians’ screwdrivers HUPslim PH, size 1 + 2

• 2C-VDE electricians’ screwdrivers HUPslim PZ/FL, size 2

• VDE telephone pliers 45°, 200 mm*

• VDE side cutters 160 mm*

• VDE combination pliers 180 mm*

• Measuring tape 3 m

• PU textile gloves, size 9

Tool backpack for the trainee, 3 compartments can be hinged upwards to the ground, front: without further inner compartments, middle: compartments for tools, rear: compartments with pockets and flaps for tools or notebook + accessoires, padded shoulder straps, lap belt, removable pad for working in a kneeling or sitting position, comes complete with 20 tools, water and dirt resistant, material: extra strong 1680D polyester, colour: black with green stiching. BackpackPro 220265.

Content:
• Screwdrivers set 1000 V, Phillips, 6 pieces. Content: Electricians’ screwdriver 1000 V 2.5 x 75 mm / 4 x 100 mm / 5.5 x 125 mm / 6.5 x 150 mm, Cross slotted screwdrivers 1000 V, Phillips size 1 and 2
• Combination pliers 1000 V, 180 mm
• Side cutters 1000 V, 160 mm
• Long chain nose pliers 1000 V, straight, 200 mm
• VDE/GS-Voltage testers, VDE-tested 0426/72
• Cable stripping knive “Safety”, without hook blade, 8 – 28 mm2
• Industrial ring brush, size 4
• Plaster cups
• Paint scrapers 40 mm
• Stone chisels, flat oval shank, 28 x 250 mm
• Electricians’ chisels, 10 x 250 mm
• Engineers‘ hammer 300 g
• Sledge hammer 1000 g
• Junior hacksaw, with metal blade
• Super wire stripper “Basic”, 0.5 – 4 mm2

Content:
• 2C-VDE telephone pliers, 200 mm
• 2C-VDE combination pliers, 180 mm
• 2C-VDE cutters, 160 mm
• 2C-VDE wire stripping pliers, 160 mm
• 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• Cable knife, 1 blade
• Electricians’ chisel, 10 x 250 mm
• VDE/GS Voltage tester - blade 50 mm
• PUK pocket saw, fixed handle
• Brush
• Stone chisel, 300 mm
• Engineers’ hammer, 300 g
• Double-face sledge hammer, 1000 g
• Spatula, 40 mm
• Plaster container

Contents:
• 2C-VDE electrician‘s screwdrivers
2,5 x 75, 4 x 100, 5,5 x 125 und 6,5 x 150 mm
• 2C-VDE cross slotted screwdrivers, PH, size 1 + 2
• 2C-VDE combination pliers 185 mm
• 2C-VDE side cutters 165 mm
• 2C-VDE telephone pliers 200 mm
• 2C-VDE wire stripping pliers 160 mm
• Wire stripper, hooked blade, 8 - 28 mm Ø
• Cable knife, 1-pieces
• Engineers’ hammer, 300 g
• PUK pocket saw, fixed handle
• Electricians’ chisel, 10 x 250 mm
• Paint scraper, 40 mm
• Voltage tester, blade 50 mm
• Measuring tape,
• Water brushes

Document compartment, compartments for tools and instruments, small pocket, big compartments, rubber loops, separate well protected main compartment for laptop and documents, additionally divided with removable centre wall. Notebook compartment up to 15“. Colour: black with green stiching. Case 220292.

Content:

• Combination pliers 180 mm

• Side cutters 160 mm

• Long chain nose pliers 45°, 160 mm

• Screwdrivers set “HUPslim“ 1000 V Phillips, 6 pcs. • Screwdrivers set “HUPslim“ 1000 V PZ/FL 1 + 2

• Stripper “Allrounder“ 4 – 15 mm²

• Cable stripper “Top Coax Plus“ 4,8 – 7,5 mm²

• Perlon fish tapes, 15 m x 3 mm

• Spanners for switch-cabinets, “HUPkey“

• Water pump pliers 170 mm

• Folding rules

• Aluminium spirit levels 400 mm

• Carpenters‘ pencils

• Engineers‘ hammer 300 g

• Electricians’ chisels 10 x 250 mm

• Voltage tester “Basic +“

• Crimping pliers “HUPsquare10“ 0,08 – 10 mm²

• Crimping pliers for modular plugs

• Cable stripping knives

• Sensor Tool LSA

• Hand saw “PUK“

• Ratchet screwdriver set “FlexBag“

• ESD Electronic side cutter without cutting-facet perfected cutting force performance

Hard case, black, lockable, incl. 2 keys, 2 tool boards and document pocket completely removable, base tray with variable aluminium dividers, reinforced metal corners as additional protection against damage, equipped with 24 tools (case 220036)

Contents:

• VDE electrician's screwdriver 1000 V 3 x 0.5 x 100 mm | 4 x 0.8 x 100 mm | 5.5 x 1.0 x 125 mm

• VDE screwdriver HUPslim PH, size 1 + 2

• VDE screwdriver HUPslim PZ, size 1 + 2

• VDE screwdriver HUPslim PZ/FL, size 2

• VDE Snipe nose pliers DIN ISO 5745*

• VDE diagonal cutters 160 mm*

• VDE cable cutters 160 mm*

• Basic" wire stripper 0.5 - 6 mm²

• Basic wire cutter 8 - 28 mm

• Basic" voltage tester 6 - 400 V

• XL stripper

• Plaster mould

• Puk saw with fixed handle

• VDE cable knife, straight blade

• Plasterer's hammer 300 g

• Painter's spatula 40 mm

• Industrial ring brush size 4

• Scale 2 m

• Carpenter's pencils

• Torpedo spirit level 225 mm

Hard case, black, 2 tool boards and document pocket completely removable, lockable,

incl. 2 keys, bottom tray with variable dividers made of aluminum, reinforced metal

corners as additional protection against damage. (Case 220030)

Content:

• VDE electrician screwdriver 1000 V

3 x 0,5 x 100 mm | 4 x 0,8 x 100 mm | 5,5 x 1,0 x 125 mm

• VDE screwdriver PH, size 1 + 2

• VDE screwdriver PZ, size 1 + 2

• VDE cable cutter 160 mm*

• VDE side cutters DIN ISO 5749 160 mm*

• VDE long chain nose pliers DIN ISO 5745 200 mm*

• Wire stripper “Basic“ 0,5 – 4 mm²

• Cable stripping knives “Basic“ without hook blade 8 – 28 mm²

(safe work for trainees)

• VDE-Cable knife 50 mm

• VDE/GS-Voltage testers

• Cabinet levels 225 mm

• Original “PUK“ hand saw

• Cross peen hammer 300 g

• Painter's spatula 40 mm

• Plaster cup

• Industrial ring brush, size 4

• Folding ruler 2 m

• Carpenters pencil

Included for FREE!

Crimping pliers “HUPsquare 10”

Art. No. 212804

For end sleeves, precise square pressing profile, automatic setting to the conductor cross-section, unlockable forced lock, guarantees connections that meet DIN, high transmission and ergonomically shaped plastic handles for fatigue free working, square pressing

Contents:
• 2C combination pliers
• 2C electricians’ screwdriver
• 2C cross slotted screwdriver PH
• Cable stripper, manual
• VDE/GS voltage tester

8 compartments for your tools, reinforced main compartment, steel rivets for high reliable quality. Big front compartment for nails or measurement tape, hammer sleeve, fits up to 135 cm hips, material: extra strong 600D polyester, colour: black/green.

Contents:
• 2C cross slotted screwdrivers PH, size 1 and 2
• 2C electrician’s screwdriver
• 2C combination pliers 200 mm
• 2C side cutters 160 mm
• Engineers’ hammer, 300 g
• Cable stripping knife, 1-piece
• Measuring tape, 3 m

Contents:
• 2C combination pliers, 200 mm
• 2C side cutters, 160 mm
• 2C electrician’s screwdriver
• 2C cross slotted screwdrivers PH, size 1 and 2
• Voltage tester “Basic”
• Cable knife, 1-piece

10 compartments to organize your tools, hammer sleeve and tapeholder belt loop for easy attachment to belt, materials: extra strong 600D polyester, colour: black/green

Contents:
• 2C-VDE-Electricians’ screwdriver 5,5x125 mm
• 2C-VDE-Electricians’ screwdriver 3x100 mm
• 2C-VDE-Cross slotted screwdrivers PH 2
• Measuring tape 3 m
• 2C-Combination pliers 180 mm
• 2C-Side cutters 160 mm
• VDE/GS Voltage tester 125-250 V
• Utility metal knive
• Wire stripper, hooked blade, 8-28 mm Ø
• Cable cutter with stripping function

Contents:
• 2C-VDE-Cable cutters 200 mm
• 2C-VDE-Side cutters 165 mm
• 2C-VDE-Combination pliers 185 mm
• 2C-Replaceable blade system „Vario“ 1000 V, 10 pcs.
• VDE-Cable cutter straight blade, 50 mm
• Voltage tester „Profi“ 12-690 V
• Test Pen „Basic“

Content:
• 2C-VDE-Side cutters 165 mm
• 2C-VDE-Cable cutters 160 mm
• 2C-VDE-Combination pliers 185 mm
• 2C-VDE-Electricians’ screwdriver 5,5x125 mm
• 2C-VDE-Cross slotted screwdrivers PH 2
• 2C-VDE-Electricians’ screwdriver 3x100 mm
• VDE-Cable cutter straight blade, 50 mm
• Test Pen „Basic“

of black linen, with leather strap fastening

Content:
• 2C-VDE electricians screwdrivers 2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm
• 2C-VDE cross slotted screwdrivers PZ, size 1 + 2
• 2C-VDE combination pliers VDE 185 mm
• 2C-VDE side cutters 185 mm
• Voltage tester “Basic”
• Cable stripping knife, 35 mm

in red coloured wallet

Contents:
• VDE combination pliers 185 mm
• VDE round nose pliers 160 mm
• VDE side cutters 165 mm
• VDE wire stripping pliers 160 mm
• 2C-VDE electricians screwdrivers 75, 100, 125, 150 mm
• 2C-VDE cross slotted screwdrivers PZ, size 1
• 2C-VDE socket wrench 7 mm
• VDE/GS voltage tester

Tool backpack, 3 compartments can be hinged upwards to the ground, front: without further inner compartments, middle: compartments for tools, rear: compartments with pockets and flaps for tools or notebook + accessoires, padded shoulder straps, lap belt, removable pad for working in a kneeling or sitting position, water and dirt resistant, material: extra strong 1680D polyester, colour: black with green stiching.

Tool backpack for the trainee, 3 compartments can be hinged upwards to the ground, front: without further inner compartments, middle: compartments for tools, rear: compartments with pockets and flaps for tools or notebook + accessoires, padded shoulder straps, lap belt, removable pad for working in a kneeling or sitting position, comes complete with 20 tools, water and dirt resistant, material: extra strong 1680D polyester, colour: black with green stiching. BackpackPro 220265.

Content:
• Screwdrivers set 1000 V, Phillips, 6 pieces. Content: Electricians’ screwdriver 1000 V 2.5 x 75 mm / 4 x 100 mm / 5.5 x 125 mm / 6.5 x 150 mm, Cross slotted screwdrivers 1000 V, Phillips size 1 and 2
• Combination pliers 1000 V, 180 mm
• Side cutters 1000 V, 160 mm
• Long chain nose pliers 1000 V, straight, 200 mm
• VDE/GS-Voltage testers, VDE-tested 0426/72
• Cable stripping knive “Safety”, without hook blade, 8 – 28 mm2
• Industrial ring brush, size 4
• Plaster cups
• Paint scrapers 40 mm
• Stone chisels, flat oval shank, 28 x 250 mm
• Electricians’ chisels, 10 x 250 mm
• Engineers‘ hammer 300 g
• Sledge hammer 1000 g
• Junior hacksaw, with metal blade
• Super wire stripper “Basic”, 0.5 – 4 mm2

Tool backpack for the professional user, 3 compartments can be hinged upwards to the ground, front: without further inner compartments, middle: compartments for tools, rear: compartments with pockets and flaps for tools or notebook + accessoires, padded shoulder straps, lap belt, removable pad for working in a kneeling or sitting position, comes complete with 11 tools, water and dirt resistant, material: extra strong polyester, colour: black with green stiching. BackpackPro 220265.

Content:
• Screwdrivers set 1000 V, Phillips, 6 pieces Content: Electricians’ screwdriver 1000 V 2.5 x 75 mm / 4 x 100 mm / 5.5 x 125 mm / 6.5 x 150 mm, Cross slotted screwdrivers 1000 V, Phillips size 1 and 2
• Combination pliers 1000 V, 180 mm
• Side cutters 1000 V, 160 mm
• Long chain nose pliers 1000 V, straight, 200 mm
• Cable cutters 1000 V, 200 mm
• VDE/GS-Voltage testers, VDE-tested 0426/72

Work on the go with the new HAUPA tool backpack “HUPtoGo”

• 41 compartments, including 6 outer pockets (3 neoprene)

• 4 internal zip pockets

• Front neoprene pockets (e.g. level, long chisel)

• Practical detachable knee pad

• High, waterproof base for moisture protection

• Reflective strips on front

• Velcro pad on front pocket can be embroidered for personalisation

• 2 metal fixing lugs on sides

• Ergonomically padded, adjustable shoulder straps

• Padded back and carrying handle

• Highly tip resistant, even when open

• Material: extremely strong 1680D polyester

• Colour: black with grey seams

Work on the go with the new HAUPA tool backpack “HUPtoGo1”

• 41 compartments, including 6 outer pockets (3 neoprene)

• 4 internal zip pockets

• Front neoprene pockets (e.g. level, long chisel)

• Practical detachable knee pad

• High, waterproof base for moisture protection

• Reflective strips on front

• Velcro pad on front pocket can be embroidered for personalisation

• 2 metal fixing lugs on sides

• Ergonomically padded, adjustable shoulder straps

• Padded back and carrying handle

• Highly tip resistant, even when open

• Material: extremely strong 1680D polyester

• Colour: black with grey seams

• Tool backpack 220249

With professional equipment 220830 ideal for quick use, thanks to HAUPA professional tools.

Contents:

• VDE cable cutter 160 mm*

• VDE long chain nose pliers DIN ISO 5745*

• VDE combination pliers 200 mm*

• VDE side cutters 160 mm*

• VDE cable stripping knife, straight blade 50 mm

• LED mini working light “HUPlight4” | 4 Watt

• Voltage tester “Profi LEDplus II” 6 – 1,000 V

• Universal switch cabinet key “HUPkey”

• Wire stripper Super Plus 0.2 – 6 mm²

• VDE pliers wrench 280 mm

• VDE screwdriver set HUPslimPlus

• Socket set 1/4", 33-parts

• Fitter’s hammer 500 g

• Electrician’s chisel 10 x 250 mm

• Stone chisel, flat oval 32 x 300 mm

• Flexi PUK saw

• Set X-CrimpPlus

• Switch cabinet level 200 mm

• Measuring tape 5 m

• Deep hole marker, 2-in-1, black, with sharpener

Tool backpack for the professional user, 3 compartments can be hinged upwards to the ground, front: without further inner compartments, middle: compartments for tools, rear: compartments with pockets and flaps for tools or notebook + accessoires, padded shoulder straps, lap belt, removable pad for working in a kneeling or sitting position, comes complete with 19 tools, water and dirt resistant, material: extra strong 1680D polyester, colour: black with green stiching. BackpackPro 220265.

Content: • Screwdrivers set 1000 V, Phillips, 6 pieces Content: Electricians’ screwdriver 1000 V 2.5 x 75 mm / 4 x 100 mm / 5.5 x 125 mm / 6.5 x 150 mm, Cross slotted screwdrivers 1000 V, Phillips size 1 and 2
• Combination pliers 1000 V, 180 mm
• Side cutters 1000 V, 160 mm
• Long chain nose pliers 1000 V, bent, 200 mm
• Voltage tester “TestPen Profi”, 12 – 1000 V
• Cable stripping knive “Basic”, with hook blade, 8 – 28 mm2
• Super wire stripper “Basic”, 0.5 – 4 mm2
• Industrial ring brush, size 4
• Paint scrapers 40 mm
• Electricians’ chisels 10 x 250 mm
• Engineers‘ hammer 300 g
• Cable stripping knives, with wooden scales
• Hand saw “PUK”, with fixed handle
• Measuring tapes 3 m

Work on the go with the new HAUPA tool backpack “HUPtoGo2”

• 41 compartments, including 6 outer pockets (3 neoprene)

• 4 internal zip pockets

• Front neoprene pockets (e.g. level, long chisel)

• Practical detachable knee pad

• High, waterproof base for moisture protection

• Reflective strips on front

• Velcro pad on front pocket can be embroidered for personalisation

• 2 metal fixing lugs on sides

• Ergonomically padded, adjustable shoulder straps

• Padded back and carrying handle

• Highly tip resistant, even when open

• Material: extremely strong 1680D polyester

• Colour: black with grey seams

• Tool backpack 220249

Contents:

• VDE long chain nose pliers, curved, 200 mm*

• VDE combination pliers 180 mm*

• VDE side cutters 160 mm*

• VDE screwdriver set HUPslim PH

• Utility knife “HUPblackSeries18”

• Blades “HUPblades18”

• LED torch “Pen Torch”

• Wire stripper “Basic” 0.5 – 6 mm²

• Basic cable stripper 8 – 28 mm with hook blade

• Test Pen Profi 12 – 1000 V

• Fitter’s hammer 500 g

• Electrician’s chisel 10 x 250 mm

• PUK saw with fixed handle

• Carpenter’s pencil, black, Mine 7B, triangular, 240 mm

• Measuring tape 3 m

Tool backpack for the professional user, 3 compartments can be hinged upwards to the ground, front: without further inner compartments, middle: compartments for tools, rear: compartments with pockets and flaps for tools or notebook + accessoires, padded shoulder straps, lap belt, removable pad for working in a kneeling or sitting position, comes complete with 22 tools, water and dirt resistant, material: extra strong 1680D polyester, colour: black with green stiching. BackpackPro 220265.

Content:
• “Vario” 1000 V replaceable blade system, Phillips, 10 pcs. Content: 2C exchangeable handle, screw cap, replaceable blade - slotted blade 0.4 x 2.5 / 0.5 x 3.0 / 0.8 x 4.0 / PH1 / PH2, PZ/FL 2, switch cabinet key – square 1, double-bit
• Combination pliers 1000 V, 180 mm
• Side cutters 1000 V, 160 mm
• Long chain nose pliers 1000 V, straight, 200 mm
• Cable cutters 1000 V, 200 mm
• Water pump pliers 1000 V, 240 mm
• “Multi Check II” - digital high-capacity multimeter
• Voltage tester “Profi LEDplus II” 6 – 1000 V
• Automatic wire stripper “Super Plus” 0.2 – 6 mm2
• Cable knife 1000 V, with straight blade
• Spanners for switch-cabinets, “HUPkey”
• Mini working light “HUPlight4”, LED 4 Watt
• Measuring tapes 3 m

Tool bag with inner and outer tool compartments, rubber-reinforced base. Waterproof and dirt resistant, double cross-seam for heavy loads, removable shoulder strap, adjustable, 10 compartments outside (various sizes), 10 compartments inside (various sizes), belt for spirit level (outside), material: extra strong 600D polyester, colour: black/green.

Contents:
• 2C combination pliers, 200 mm
• 2C side cutters, 160 mm
• 2C telephone pliers, straight
• 2C wire stripping pliers, 160 mm
• VDE screwdriver set, 6 electrician’s screwdrivers
• Voltage tester
• Wire stripper, hooked blade, 8 - 28 mm Ø
• Water brush
• Paint scraper, 40 mm
• Electrician’s chisel, 10 x 250 mm
• Stone chisel, 300 mm
• Engineers’ hammer, 300 g
• Sledge hammer, 1000 g
• Plaster container
• Cable knife, 1-pieces
• PUK pocket saw, fixed handle
• Carpenter’s pencil

Contents:
• 2C-VDE combinations pliers 185 mm
• 2C-VDE side cutters 165 mm
• 2C-VDE telephone pliers pliers, straight, 200 mm
• 2C-VDE wire stripping pliers 160 mm
• 2C-VDE-screwdriver set, 6 electrician’s screwdrivers
• Spanner for switch-cabinets
• Cable knive
• Voltagetester “Basic”

Tool bag XL with inner and outer tool compartments, rubber-reinforced base. Features: waterproof and dirt resistant, rubber-reinforced base, double cross-seam for heavy loads, removable shoulder strap, adjustable, 10 compartments inside/outside (various sizes), belt for spirit level (outside), material: extra strong 600D polyester, colour: black/green.

Contents:
• 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• 2C combination pliers, 200 mm
• 2C heavy duty side cutters, 175 mm
• 2C telephone pliers, straight, 200 mm
• 2C wire stripping pliers, 160 mm
• Voltage tester
• Wire stripper, hooked blade, 8 - 28 mm Ø
• Water brush
• Paint scraper, 40 mm
• Electrician’s chisel, 10 x 250 mm
• Stone chisel, 300 mm
• Engineers’ hammer, 300 g
• Sledge hammer, 1000 g
• Plaster container
• Cable knife, 1 blade
• PUK pocket saw, fixed handle
• Carpenter’s pencil

Contents:
• 2C-VDE combinations pliers, 185 mm
• 2C-VDE heavy duty side cutters, 170 mm
• 2C-VDE telephone pliers, straight, 200 mm
• 2C-VDE electrician’s screwdriver PZ/FL 1 + 2
• 2C-VDE electrician’s screwdriver
2,5x75, 3,5x100, 4x100, 6,5x150 mm
• 2C-VDE cross slotted screwdrivers PH 1 + 2
• Automatic wire stripper 0,2-6 mm2
• Switching cabinet key
• Cable stripper hooked blade, 8 - 28 mm Ø

Contents:
• 2C-VDE combinations pliers, 185 mm
• 2V-VDE heavy duty side cutters, 170 mm
• 2C-VDE telephone pliers, straight, 200 mm
• 2C-VDE wire stripping pliers, 160 mm
• 2C-VDE electrician‘s screwdrivers,
2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• Spanners for switch-cabinets
• Cable knife
• Voltage tester „Basic“

very big box look alike Tool bag, easy approach to the tools, inside and outside compartments for tools, reinforced handles, material: extra strong 600D polyester, colour: black/green.

Contents:
• 2C-VDE electrician‘s screwdrivers 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2-VDE cross slotted screwdrivers PH, size 1 + 2
• 2C combination pliers, 180 mm
• 2C telephone pliers, 200 mm
• 2C side cutters, 160 mm
• 2C water pump pliers, 240 mm
• 2C wire stripping pliers, 160 mm
• Bit-Box, 17-pieces
• Voltage tester „Basic“
• Allen keys set, 7-pieces
• Adjustable single-head wrench
• Chalk - blue
• Impact cord roller
• Carpenters’ pencil
• Engineers’ hammer 300 g
• Cable stripping knive
• Junior hacksaw, heavy 150 mm
• Cable cutters 160 mm insulatet
• Combi-Drillbox
• Spanners for switch-cabinets
• Folding rule, fibre glass, 2 m

Contents:
• 2C combination pliers, 200 mm
• 2C side cutters, 160 mm
• 2C telephon pliers, straight, 200 mm
• 2C water pump pliers, 240 mm
• VDE screwdrivers set, 6 electricians’ screwdrivers
• Cable ties, 292 x 3,6 mm
• Cabinet spirit level
• Filling knife, 40 mm
• Electrician’s chisel, 10 x 250 mm
• Voltage tester, VDE/GS
• Fitter’s hammer, 300 g
• Universal stripper
• Measuring tape, 3 m
• PUK pocket saw, fixed handle
• Carpenters pencil

Tool bag with compartments inside and out, base shell made from plastic, dual seat seaming for high loads, removable shoulder strap, adjustable, 4 outer pockets (in various sizes), holder for insulation tape, 2 large internal compartments, suitable, for example, for DIN A4 folders or 15“ laptops plus various compartments (in various sizes), straps for spirit level (outside), material: extremely strong 1680D polyester, water and dirt resistant, colour: black/green.

Contents:
• 2C-VDE combinations pliers, 185 mm
• 2C-VDE heavy duty side cutters, 170 mm
• 2C-VDE telephone pliers, straight, 200 mm
• 2C-VDE electrician’s screwdriver 2,5 x 75, 3,5 x 100, 4 x 100, 5,5 x 125, 6,5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH 1 + 2
• 2C-VDE electrician’s screwdriver PZ/FL 1 + 2
• Cable cutter 160 mm
• ESD electronic pliers 110 mm
• Allround soft-grip scissor 150 mm
• Automatic cable stripper 0,08-6,0 mm2
• LED „Headlight“ headlamp
• VDE cable knife 50 mm
• Utility knives „EXTRA“ with spare blades 19 mm
• Voltage tester „Profi LCD Plus“ 12-1.000 V
• Spanners for switch-cabinets
• Measuring tapes 3 m
• Adjustable single-head wrench 24 mm
• Bit set, 33 pieces
• Industrial cleaning wipes
• Cable ties black UV resistant, 203x4,6 mm
• Cable ties natural 203x4,6 mm
• HAUPA „Flex Bag“
• Set X-CrimpPlus

Contents:
• 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• 2C-VDE telephone pliers, 200 mm
• 2C-VDE combination pliers, 180 mm
• 2C-VDE heavy duty side cutters, 170 mm
• 2C-VDE wire stripping pliers, 160 mm
• Cable knife, 1 blade
• Electricians’ chisel, 10 x 250 mm
• VDE/GS Voltage tester - blade 50 mm
• PUK pocket saw, fixed handle
• Brush
• Stone chisel, 300 mm
• Engineers’ hammer, 300 g
• Double-face sledge hammer, 1000 g
• Spatula, 40 mm
• Plaster container

Contents:
• 2C-VDE combinations pliers, 185 mm
• 2C-VDE heavy duty side cutters, 170 mm
• 2C-VDE telephone pliers, straight, 200 mm
• 2C-VDE electrician’s screwdriver PZ/FL 1 + 2
• 2C-VDE electrician’s screwdriver
2,5x75, 3,5x100, 4x100, 6,5x150 mm
• 2C-VDE cross slotted screwdrivers PH 1 + 2
• Automatic wire stripper 0,2-6 mm2
• Switching cabinet key
• Cable stripper hooked blade, 8 - 28 mm Ø

Features:
• Ergonomic handle
• Adjustable carrying strap with shoulder pad
• Business card pocket for identification purposes
• 2 large side zipped pockets (one of which can be opened fully and has inserts)
• 2 large folding side pockets, can be removed individually, one of which as a small pocket on the front
• Polytex straps for transport securing

Contents:
• 2K-VDE electrician's screwdriver 2.5 x 75, 3.5 x 100, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2K-VDE screwdriver PH 1 + 2
• 2K-VDE screwdriver PZ/FL 1 + 2
• Cable cutter 160 mm dip-insulated
• VDE side cutter 165 mm
• VDE combination pliers 185 mm
• VDE-long chain nose pliers straight
• Electronic side cutter 110 mm
• Electrician's scissors, stainless steel 150 mm
• Switching cabinet key
• Adjustable single-head wrench 24 mm
• Bit set, 33 pieces
• All-purpose industrial cleaning cloths
• Cable-ties, black, UV-resistant 203 x 4.6 mm
• Cable-ties, natural, 203 x 4.6 mm
• Automatic strippers 0.08 - 6.0 qmm
• LED head lamp 75 lm
• VDE cable knife with replaceable blades 50 mm
• Cutting knife "EXTRA" with replacement blades 19 mm
• Voltage tester "Profi LCD Plus" 12 - 1,000 V
• Electrical insulating tape VDE 15 mm x 10 m, Rainbow pack, 263820, 10 coulors
• Measuring tape 3 m
• HAUPA "Flex Bag"
• Set X-CrimpPlus

Contents:
• 2K-VDE electrician's screwdriver 2.5 x 75, 3.5 x 100, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2K-VDE screwdriver PH 1 + 2
• 2K-VDE screwdriver PZ/FL 1 + 2
• 2K-VDE-long chain nose pliers straight
• Cable cutter 160 mm dip-insulated
• VDE side cutter 165 mm
• VDE combination pliers 185 mm
• Electronic side cutter 110 mm
• Electrician's scissors, stainless steel 150 mm
• Cutting knife "EXTRA" with replacement blades 19 mm
• Adjustable single-head wrench 24 mm
• All-purpose industrial cleaning cloths
• Cable-ties, black, UV-resistant 203 x 4.6 mm
• Electrical insulating tape VDE 15 mm x 10 m, Rainbow pack, 263820, 10 coulors
• Voltage tester "Basic" 6 - 400 V
• Switching cabinet key
• Measuring tape 3 m
• LED head lamp 75 lm

Contents:
• 2K-VDE electrician's screwdriver 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2K-VDE screwdriver PH 1 + 2
• 2K-VDE screwdriver PZ/FL 1 + 2
• VDE side cutter 165 mm
• VDE combination pliers 185 mm
• Cable cutter 160 mm dip-insulated
• Electrical insulating tape VDE 15 mm x 10 m, Rainbow pack, 263820, 10 coulors
• Measuring tape 3 m

Document compartment, compartments for tools and instruments, small pocket, big compartments, rubber loops, separate well protected main compartment for laptop and documents, additionally divided with removable centre wall. Notebook compartment up to 15“. Colour: black with green stiching. Case 220292.

Content:

• Combination pliers 180 mm

• Side cutters 160 mm

• Long chain nose pliers 45°, 160 mm

• Screwdrivers set “HUPslim“ 1000 V Phillips, 6 pcs. • Screwdrivers set “HUPslim“ 1000 V PZ/FL 1 + 2

• Stripper “Allrounder“ 4 – 15 mm²

• Cable stripper “Top Coax Plus“ 4,8 – 7,5 mm²

• Perlon fish tapes, 15 m x 3 mm

• Spanners for switch-cabinets, “HUPkey“

• Water pump pliers 170 mm

• Folding rules

• Aluminium spirit levels 400 mm

• Carpenters‘ pencils

• Engineers‘ hammer 300 g

• Electricians’ chisels 10 x 250 mm

• Voltage tester “Basic +“

• Crimping pliers “HUPsquare10“ 0,08 – 10 mm²

• Crimping pliers for modular plugs

• Cable stripping knives

• Sensor Tool LSA

• Hand saw “PUK“

• Ratchet screwdriver set “FlexBag“

• ESD Electronic side cutter without cutting-facet perfected cutting force performance

Tool bag for hanging up/covering in a commercially available 10L bucket, 30 exterior pockets/compartments, 14 inner pockets/compartments, 1 hammer loop, 1 loop with carabiner, stain-resistant, double cross-seam stitching for high load capacity, material: extra strong 1680D polyester, colour: black, green.

Supplied without buckets!

220022: Tradition
220024: Fan

220060: Favorit
220064: Admiral
220066: Profi

Content:
• 2C-VDE telephone pliers, 200 mm
• 2C-VDE combination pliers, 180 mm
• 2C-VDE cutters, 160 mm
• 2C-VDE wire stripping pliers, 160 mm
• 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• Cable knife, 1 blade
• Electricians’ chisel, 10 x 250 mm
• VDE/GS Voltage tester - blade 50 mm
• PUK pocket saw, fixed handle
• Brush
• Stone chisel, 300 mm
• Engineers’ hammer, 300 g
• Double-face sledge hammer, 1000 g
• Spatula, 40 mm
• Plaster container

Content:
• 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 and 2

• 2C telephone pliers, 200 mm

• 2C combination pliers, 180 mm

• 2C side cutters, 160 mm

• 2C wire stripping pliers, 160 mm

• Cable knife, 1-piece

• PUK pocket saw, fixed handle

• Double-face sledge hammer, 1000 g

• VDE/GS Voltage tester - blade 50 mm

• Electricians’ chisel, 10 x 250 mm

• Stone chisel, 300 mm

• Engineers’ hammer, 300 g

• Spatula, 40 mm

• Plaster container

• Brush

Contents:
• 2C combination pliers, 180 mm
• 2C side cutters, 160 mm
• 2C telephone pliers, 200 mm
• 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 and 2
• Voltage tester VDE/GS
• Wire stripping pliers, 0.5 - 4 mm2
• Cable stripper hooked blade, 8 - 28 mm Ø
• Cable knife, 1-pieces
• PUK pocket saw, fixed handle
• Electricians’ chisel, 10 x 250 mm
• Stone chisel, 250 mm
• Engineers’ hammer, 300 g
• Measuring Tape, 3 m
• Cabinet Level, 250 m

Contents:
• 2C combination pliers, 180 mm
• 2C side cutters, 160 mm
• 2C heavy duty side cutters, 180 mm
• 2C telephone pliers, 200 mm
• 2C telephone pliers, 200 mm, bent
• 2C water pump pliers, 240 mm
• 2C wire stripping pliers, 160 mm
• 2C electrician‘s screwdrivers, 75, 125, 150 mm
• 2C engineers’ screwdrivers, 100, 150 mm
• 2C cross slotted screwdrivers PH, size 1 and 2
• 2C cross slotted screwdrivers PZ, size 1 and 2
• Reamer square
• Cable stripper 0.5 - 4 Ø
• Cable stripper hooked blade, 8 - 28 mm Ø
• Painter scrapers
• Bench hammer 300 g
• Cable stripping knife plastic scales
• Combination snips 140 mm
• „PUK“pocket saw, adjustable handle
• Voltage tester “Basic”
• Voltage tester VDE/GS

made of black leather, all outside edges reinforced with Alu-squares, with galvanized floor-onsert of sheet-metal collapsable front, snap-fasteners riveted on side, side-loops for carrying-belts, 2 snap-locks, all 4 inside with toolcompartments and adjustable loops, without carrying belts

Contents:
• 2C long flat nose pliers, 160 mm
• 2C telephone pliers, 200 mm
• 2C combination pliers, 180 mm
• 2C side cutters, 160 mm
• 2C wire stripping pliers, 160 mm
• 2C water pump pliers, 240 mm
• ESD electronic side cutters, 115 mm
• ESD electronic needle nose pliers, 130 mm
• Crimping pliers multi insulated and non-insulated crimping terminals
• 2C engineers’ screwdrivers 100, 125, 150 mm
• 2C electrician‘s screwdrivers 2.5 x 75, 4 x 125, 5 x 150, 5 x 175 mm
• 2C cross slotted screwdrivers PH, size 0, 1 and 2
• 2C cross slotted screwdrivers PZ, size 1 and 2
• Electronic screwdriverset, 7-pieces
• 2C socket wrenches, 5.5, 12, 17
• Reamer, round
• Allen key set, 8-pieces
• Adjustable wrench, 340 mm
• Cable stripper hooked blade, 8 - 28 mm Ø
• Combination snips, 190 mm
• PUK“ pocket saw, fixed handle
• Electrician's chisel, 10 x 250 mm
• Folding rules, 2 m
• Light metal spirit level, 400 mm
• Bench hammer, 300 g
• Cable cutter, max. 16.9 mm
• Cutter knife, plastic
• Cable stripping knife, plastic scales
• VDE/GS voltage tester 125 - 250 V

Contents:
• 2C long-nosed round pliers, 160 mm
• 2C telephone pliers, 200 mm
• 2C combination pliers, 180 mm
• 2C side cutters, 160 mm
• 2C wire stripping pliers, 160 mm
• 2C water pump pliers, 240 mm
• ESD elektronic side cutters, 115 mm
• 2CE electrician‘s screwdrivers 2.5 x 75, 4 x 100, 4 x 125, 5 x 150 m
• 2C engineers’ screwdrivers 6 x 100, 7 x 125, 8 x 150 mm
• 2C cross slotted screwdrivers PH, size 1 and 2
• 2C cross slotted screwdrivers PZ, size 1 and 2
• Electronic screwdriverset, 7-pieces
• Socket wrenches SW 5.5, 13, 17
• Allen key set, 8-pieces
• Cable stripper hooked blade, 8 - 28 mm Ø
• Combination snips 190 mm
• „PUK“ pocket saw, fixed handle
• Bench hammer 400 g
• Folding rules 2 m
• Cable cutter max. 16.9 mm
• Cable stripping knife plastic scales
• Voltage tester VDE/GS

of signal-red leather, with many compartements for tools, empty

Contents:
• 2C-VDE electrician‘s screwdriver 2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm
• 2C-VDE cross slotted screwdriver PH, size 1 + 2
• VDE telephone pliers, straight, 200 mm
• VDE telephone pliers, bent, 200 mm
• VDE combination pliers 185 mm
• VDE side cutters 165 mm
• VDE wire stripping pliers 160 mm
• Socket wrenches 5,5, 7,0, 8,0, 10,0 mm
• Voltage tester „Profi“
• Hexagon sockets 10, 11, 12, 13, 14, 15, 16
• Reversible ratchet 1/2“
• T-sliding handle 1/2“
• Open end spanners 10, 12, 13, 19, 22, 24
• Cable knive
• Cable scissor 200 mm
• Slip-on bushes 5-pieces No. 1, 10 mm
• Slip-on bushes 5-pieces No. 2, 10 mm
• Slip-on bushes 5-pieces No. 3, 10 mm
• Plastic pliers 180 mm
• Plastic clamp
• Covering tape, grey
• Covering tape, red
• Safety grip
• Gloves size 9

Content:
• VDE combination pliers 185 mm
• VDE side cutters 165 mm
• VDE wire stripping pliers
• VDE round nose pliers 160 mm
• Plastic clamp
• Gloves, size 10
• 2C-VDE electrician‘s screwdrivers 2,5 x 75, 4 x 100 mm
• Safety grip
• Socket wrenches, size 6, 7, 8, 9
• Rubber towels 1000 mm
• 5 slip-on-bushes size 1, 10 mm
• 5 slip-on-bushes size 2, 10 mm
• 5 slip-on-bushes size 3, 10 mm
• 5 slip-on-bushes 10 mm
• 5 slip-on-bushes 20 mm
• 5 slip-on-bushes 30 mm
• Cable knives
• Voltage tester 150 - 250 V

Contents:
• 2C-VDE combination pliers, 180 mm*
• 2C-VDE side cutters, 160 mm*
• 2C-VDE wire stripping pliers, 160 mm
• 2C-VDE long chain nose pliers, straight, 200 mm*
• Cable cutter 160 mm, coating-insulated
• Crimping pliers for end sleeves 0,5 - 16  mm²
• Set ball point allen keys 9-pcs., extra long
• 2C exchangeable „Vario“ handle
• „Vario“ replaceable blade – slotted blade 2.5, 3, 4, 5.5 mm
• „Vario“ replaceable blade – Phillips blade 1, 2
• „Vario“ replaceable blade – pozidrive blade 1, 2
• „Vario“ replaceable blade – pozidrive blade/slotted 1 + 2
• Voltage tester „Basic“, black
• Spanners for switch-cabinets „HUPkey“
• Utility knives
• Junior hacksaw 150 mm
• Electricians’ chisels 10 x 250 mm
• Cabinet levels 230 mm
• Measuring tape, 5 m
• Reversible ratchet 1/4"
• Engineers’ hammer, 300 g
• Extension 1/4" 100 mm
• Sockets 1/4" WS: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
• Ratchet screwdriver „FlexPlus“ for long bits
• 1/4" Bits 50mm HEX 2, 2.5, 3, 4, 5, 6
• 1/4" Bits 50mm PH 0, 1, 2, 3
• 1/4" Bits 50mm PZ 0, 1, 2, 3
• 1/4" Bist 50mm FD 3, 4, 5, 6
• 1/4" Bits 50mm TX 10, 15, 20, 25, 30, 40
• 1/4" Bits 50mm PZ/FL 1 + 2
• 1/4" SQ x 1/4" HEX adapter 50 mm
• Assortment box 160 x 115 x 40 mm

Hard-top case, black, 2 tool kits, document pocket with hook-and-loop fixing, combination lock, bottom half of case equipped with variable partitions, shoulder strap

Contents:
• 2C-VDE electrician‘s screwdrivers
2,5 x 75, 4 x 100, 5,5 x 125 und 6,5 x 150 mm
• 2C-VDE cross slotted screwdrivers, PH, size 1 + 2
• 2C-VDE combination pliers 185 mm
• 2C-VDE side cutters 165 mm
• 2C-VDE telephone pliers 200 mm
• 2C-VDE wire stripping pliers 160 mm
• Wire stripper, hooked blade, 8 - 28 mm Ø
• Cable knife, 1-pieces
• Engineers’ hammer, 300 g
• PUK pocket saw, fixed handle
• Electricians’ chisel, 10 x 250 mm
• Paint scraper, 40 mm
• Voltage tester, blade 50 mm
• Measuring tape,
• Water brushes

Content:

• 2C-VDE screwdriver set PZ, 101999/PZ

• 2C-VDE cross slotted screwdrivers PH, size 1

• 2C-VDE cross slotted screwdrivers PH, size 2

• Automatic wire stripper Super Plus 0,2-6 mm²

• Cable stripping knives without hook blade 8-28 mm²

• Voltagetester „Basic“ black

• Combination pliers VDE 185 mm

• Heavy duty diagonal cutters VDE 205 mm

• Long chain nose pliers VDE angled 200 mm

• Carpenters‘ pencils • Engineers‘ hammers 300 g

• Electricians’ chisels 10x250 mm

• Hand saws „PUK“ mit fixed handle

• Torped-level 225 mm • Folding rules 2 m

• Paint scrapers 40 mm • Water brushes

• Plaster cups • Cable knives 1000 V, 50 mm

• Siedge hammers 1000 g

• Stone chisels, flat oval shank 28x250 mm

• Industrial cleaning wipes

• Crimping pliers crimping pliers for insulated terminals and end sleeves 0,5 - 6 mm

• Stripper 8-13 mm²

• Cable cutters VDE 170 mm

• Electrical insulating tape VDE 15 mm x 10 m, Rainbow pack, 263820, 10 coulors

• Voltage tester „Profi plus“

• HAUPA „Multi Check“ digital high-capacity multimeter

Contents:
• 2C-VDE electrician‘s screwdrivers
2.5 x 75, 4 x 100, 5.5 x 125 und 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers, PH, size 1 + 2
• 2C combination pliers, 185 mm
• 2C side cutters, 165 mm
• 2C telephone pliers, 200 mm
• 2C wire stripping pliers, 160 mm
• Wire stripper, hooked blade,
8 - 28 mm Ø
• Cable knife, 1-pieces
• Engineers’ hammer, 300 g
• PUK pocket saw, fixed handle
• Electricians’ chisel, 10 x 250 mm
• Paint scraper, 40 mm
• Voltage tester, blade 50 mm
• Measuring tape, 3 m
• Water brush

Contents:
• VDE long chain nose pliers, straight, 200 mm
• VDE combination pliers 185 mm
• VDE heavy duty side cutters 200 mm
• VDE wire stripping pliers 160 mm
• VDE cable cutter, max. 15 mm
• Cable knives, 1000 V, 50 mm
• Finger gloves, size 9
• 2C-VDE electrician’s screwdrivers
2,5 x 75, 3 x 100, 6,5 x 150, 8 x 175 mm
• 2C-VDE socket wrenches, size 5,5, 7, 8, 10
• 2C-VDE cross slotted screwdrivers, PH 1 + 2
• NH-safety fuse grip
• Rubber towels, 1000 x 1000 x 1,6 mm
• Plastic clips, 160 mm
• Slip on bushes, No. 1, 2, 3 (each 5 x)
• Self adhesive PVC tape, red, 10 m
• Heat protection gloves
• Safety glasses

rigid case, made of ABS-plastic material, black, integrated rolls and pull-out handle in the bottom, locks of alu-press-casting, empty. Inside: 1 separation for documents, 1 plate for tools, 1 cover-plate with pocket compartments and clip-compartment, 1 bottom-tray

Content:
• 2-component socket wrenches set
• 2-component screwdrivers 2,5 x 75, 3 x 100, 4x100, 4 x 125, 5 x 150 mm
• Cross slotted screwdrivers PH, size 1+2, insulated
• Voltage tester “Basic” 6-400 V
• Electronic screwing bit set, 34-pcs
• HAUPA ratchet screwdriver „Flex“, 58-pcs
• Combination spanners sets, 12-pcs
• Adjustable single-head wrench 24 mm
• Spanners for switch-cabinets
• Engineers‘ hammer, 300 g
• Cable stripping knives with hook blade, 8-28 mm2
• Utility knives „EXTRA“ with spare blades 19 mm
• Cable cutter with a snap, max. 16,9 mm
• Cable cutter 160 mm, dipped
• 2C combination pliers 185 mm
• 2C diagonal cutter 165 mm
• 2C long chain nose pliers 200 mm
• Automatic wire stripper Super Plus 0,2-6 mm2
• ESD Electronic side cutter 115 mm
• Measuring tape 5 m
• Cabinet levels 250
• VDE electrical insulating tape 19 mm x 20 m, black (8x)

Content:
• 2C-VDE electricians’ screwdrivers
2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• 2C-VDE combination pliers, 185 mm
• 2C-VDE side cutters, 165 mm
• 2C-VDE telephone pliers, 200 mm
• 2C-VDE wire stripping pliers, 160 mm
• Wire stripper, hooked blade, 8 - 28 mm Ø
• Cable knife, 1 blade
• Engineers’ hammer, 300 g
• PUK pocket saw, fixed handle
• Electricians’ chisel, 10 x 250 mm
• Paint scraper, 40 mm
• Voltage tester, blade 50 mm
• Measuring tape, 3 m
• Water brushes

Content:
• 2C-VDE-screwdrivers set PH
• VDE-Cable knive straight blade
• Industrial cleaning wipes
• Measuring tape 3 m
• PUK pocket saw, fixed handle
• VDE cable cutter 230 mm
• 2C-VDE combination pliers 185 mm
• VDE side cutters 165 mm
• VDE telephone pliers 45°, 200 mm
• Automatic wire stripper 0,2 - 6 mm2
• Ear protection plugs SNR 30 db
• 2C-VDE screwdrivers PZ/FL, size 2
• Perlon fish tapes 15 m x 3 mm
• LED Pocket lamp 18 x 91mm 80 lm
• Wire stripper, hooked blade, 8 - 28 mm Ø
• Crimping pliers for crimp terminals/end sleeves
• Cable cutter 160 mm, coating-insulated
• Crimping pliers 0,75 - 16 mm2
• Ratched screwdriver „Flex“, 58 pcs.
• Safety glasses • Spanner for switch-cabinets
• Voltage tester „Profi Plus“
• Elektronik ESD Electronic side cutter 115 mm
• Adjustable single-head wrench 24 mm
• 2C Allround soft-grip scissors 140 mm
• Cable glands IP 68, M20, light-grey
• Dispenser box with insulated end sleeves (DIN)
• Cable ties UV-resistant 250 x 4,8 mm
• Nailing clips for round cable 7-10, white

Content:

• 2C-VDE screwdriver set PZ, 101999/PZ

• 2C-VDE cross slotted screwdrivers PH, size 1

• 2C-VDE cross slotted screwdrivers PH, size 2

• Automatic wire stripper Super Plus 0,2 - 6 mm²

• Cable stripping knives without hook blade 8 - 28 mm²

• Voltagetester „Basic“ black • Combination pliers VDE 185 mm

• Heavy duty diagonal cutters VDE 205 mm

• Long chain nose pliers VDE angled 200 mm

• Carpenters‘ pencils • Engineers‘ hammers 300 g

• Electricians’ chisels 10 x 250 mm • Hand saws „PUK“ mit fixed handle

• Torped-level 225 mm

• Folding rules 2 m

• Paint scrapers 40 mm

• Water brushes

• Plaster cups

• Cable knives 1000 V, 50 mm

• Siedge hammers 1000 g

• Stone chisels, flat oval shank 28 x 250 mm

• Industrial cleaning wipes

• Crimping pliers crimping pliers for insulated terminals and end sleeves 0,5 - 6 mm

• Stripper 8 - 13 mm²

• Cable cutters VDE 170 mm

• Electrical insulating tape VDE 15 mm x 10 m, Rainbow pack, 263820, 10 coulors

• Voltage tester „Profi plus“

• HAUPA „Multi Check“ digital high-capacity multimeter

Content:

• 2C-VDE electrician‘s screwdrivers 2,5 x 75, 3 x 100, 3,5 x 100, 4 x 100 mm

• 2C-VDE cross slotted screwdrivers PH 1, 2, 3

• 2C-VDE cross slotted screwdrivers S-Tx 20, 25, 30

• Hexagon sockets VDE 3/8" WS 8, 9, 10, 12, 13, 14, 17, 19, 22

• Extension 3/8" VDE, 250 mm

• Reversible ratchet VDE 3/8"

• Water pump pliers VDE 240 mm

• Cable cutters VDE 230 mm

• Side heavy duty side cutters VDE 205 mm

• Side cutters VDE 165 mm

• Short flat nose pliers VDE 160 mm

• Long chain nose pliers, angled nose 200 mm

• Combination pliers VDE 205 mm

• Cable stripping knife 1000V, straight blade, 50 mm

• Safety-sets with bag, insulating mat

• Slip on bushes 1000V, 20 mm

• Slip on bushes 1000V, 10 mm

• VDE-sockets 3/8", M8, M10, M12 (xzn)

• Shutting band red/white 500 m

• Sign „dangerous voltage“

• Sign „do not switch“

Content:

• 2C-VDE electricians’ screwdrivers 2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

• Voltage tester “Profi plus” 12-1,000 V

• Single ended spanner 1000 V 10, 12, 13, 19, 22, 24

• Finger gloves 1000 V, size 9

• Safety fuse grips

• Flat nose pliers 1000 V

• Slip on bushes 1000 V no. 1,2, 3 (each 5x)

• VDE cable knife, 50 mm

• VDE combination pliers 185 mm

• VDE diagonal cutter 165 mm

• VDE long chain nose pliers 200 mm

• Tool case 1000 V, drive 3/8“

• Electrical insulating tape, red (6x)

Content:

• 2C telephone pliers, straight, 200 mm

• 2C combination pliers, 180 mm

• 2C heavy duty side cutters, 180 mm

• 2C wire stripping pliers, 160 mm

• 2C electrician‘s screwdrivers 2.5 x 75, 3 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C cross slotted screwdrivers, PH, size 1 and 2

• Cable knife, 1-pieces

• Wire stripper, hooked blade, 8 - 28 mm Ø

• PUK pocket saw, fixed handle

• Paint scraper, 40 mm

• Electricians’ chisel, 10 x 250 mm

• Voltage tester, 220 - 250 volt

• Engineers’ hammer, 300 g

• Measuring stick, 2 m

Content:

• 2C side cutters, 160 mm

• 2C telephone pliers, 180 mm

• 2C telephone pliers, 200 mm, bent

• 2C electrician screwdrivers 75, 100, 150 mm

• 2C cross slotted screwdrivers PH, size 0, 1, 2

• Electronic screwdriver set, 7-pieces

• Control cabinet key

• Precision stripper “PWS-Plus” 0.25 - 0.8 Ø

• Combination snips 190 mm

• „PUK“ pocket saw, fixed handle

• Crimping pliers for coaxial connectors

• ESD electronic side cutters, 130 mm

• Stripper for coaxial cable

• VDE/GS voltage tester

• Stripper for UTP/STP data cable

• Crimping pliers for modular plugs

• Sensor tool

Contents:

• 2C electrician’s screwdrivers, 75, 100, 125, 150 mm

• 2C engineers’ screwdriver, 100 mm

• 2C cross slotted screwdrivers, PZ, size 1 and 2

• Control cabinet key

• Jointing chisel, 26 x 250 mm

• Electrician's chisel, 10 x 250 mm

• Cable stripping knife, plastic shank

• Universal saw, heavy 150 mm

• 2C combination pliers, 180 mm

• 2C heavy duty side cutters, 180 mm

• 2C telephone pliers, 200 mm

• 2C wire stripping pliers, 160 mm

• Cabinet level, 250 mm

• Wire stripper, hooked blade, 8 - 28 mm Ø

• Bench hammer, 300 g

• Voltage tester “Basic”

• VDE/GS voltage tester

Content:
• 2C electrician‘s screwdrivers, 2,5 x 75, 4 x 100, 4 x 125, 5 x 150 mm
• 2C cross slotted screwdrivers, PH, size 1 and 2
• Electronic screwdriver set, 7-pieces
• 2C combination pliers, 180 mm
• 2C side cutters, 160 mm
• 2C telephone pliers, 200 mm
• Wire stripper, hooked blade, 8 - 28 mm Ø
• Cable stripping knive, 4 - 16 mm Ø
• Automatic wire stripper, 0,2 - 6 mm2
• Cable cutter with a snap
• 2K Soft-Grip scissor, 140 mm
• PUK pocket saw, fixed handle
• HAUPA „Bit box“, 17-pieces
• SDS-plus set, 5-pieces
• Spirit level, 400 mm
• Measuring tape, 3 m
• Voltage tester „Basic“

Content:

• 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2-VDE cross slotted screwdrivers PH, size 1 and 2

• 2C combination pliers, 180 mm

• 2C side cutters, 160 mm

• 2C telephone pliers, straight, 200 mm

• 2C wire stripping pliers, 160 mm

• Wire stripper, hooked blade, 8 - 28 mm Ø

• Cable knife, 1-pieces

• Engineers’ hammer, 300 g

• PUK pocket saw, fixed handle

• Electricians’ chisel, 10 x 250 mm

• Voltage tester blade, 50 mm

• Measuring stick, 2 m

• Paint scraper, 40 mm

• Water brushes

rigid case, black, 28 compartments, 1 combination lock, 1 separation for documents, 2 plate for tools, 2 lockable locks, ground bowl with variables to dividing bars, framed push border

Content:

• 2C electrician‘s screwdrivers 75, 125, 150 mm

• 2C engineers’ screwdrivers 100, 150 mm

• 2C cross slotted screwdrivers PH, size 1 + 2

• 2C combination pliers, 180 mm

• 2C heavy duty side cutters, 180 mm

• 2C telephone pliers, 200 mm

• 2C telephone pliers, bent 200 mm

• 2C water pump pliers, 240 mm

• 2C wire stripping pliers, 160 mm

• 2C piercing awl

• Wire stripper, hooked blade, 8 - 28 mm Ø

• Voltage tester, 150 - 250 V

• Adjustable wrench, 210 mm

• Paint scraper, 50 mm

• Electricians’ Chisel, 10 x 250 mm

• Engineers’ hammer, 300 g

• Cable knife, 1 blade

• Universal scissors, 190 mm

• PUK pocket saw, fixed handle

• Measuring stick, 2 m

• Alu level 400 mm

Content:

• 2C cross slotted screwdrivers, PH, size 1 and 2

• 2C electrician‘s screwdrivers 2.5 x 75, 4 x 100, 4 x 125, 5 x 150

• 2C electrician‘s screwdrivers 2.5 x 75 (bare)

• 2C combination pliers, 160 mm

• 2C side cutters, 160 mm

• 2C telephone pliers, straight, 200 mm

• 2C telephone pliers, bent, 200 mm

• 2C wire stripping pliers, 160 mm

• ESD electronic side cutters, 115 mm

• ESD electronic needle nose pliers, 130 mm

• ESD Electronic round nose pliers, 130 mm

• ESD electronic needle nose pliers, 130 mm, 45°

• Engineers’ screwdrivers, 8 x 150 mm

• Elektronic screwdriver set, 7-pieces

• Tweezer, straight, 130 mm

• Tweezer, flat, 145 mm

• 2C socket wrenches 5, 5.5, 6

• 2C piercing awl, round

• Voltage tester 50 - 250 Volt

• Checking mirror 210 mm

• Claw holder, size 525

• Spanner, 175 mm

• Solder, Sn 60% 1 mm 100 g

• Universal scissors, 190 mm

• Crown scissors, 115 mm

• Contact file set. 6 pieces

Content:

• 2C electrician‘s screwdrivers 4 x 100, 5 x 150 mm

• 2C engineers’ screwdrivers 6 x 100, 8 x 150 mm

• 2C cross slotted screwdrivers, PH, size 1 and 2

• 2C long nose round pliers, 160 mm

• 2C long nose flat pliers, 160 mm

• 2C telephone pliers 200 mm

• 2C telephone pliers, bent, 200 mm

• 2C combination pliers 160 mm

• 2C side cutters, 160 mm

• 2C heavy duty side cutters, 200 mm

• Cable stripper 0.5 - 4 Ø

• ESD electronic side cutters, 115 mm

• Crimping pliers for crimping terminals

• Socket wrench set, 1/4”, 33 pieces

• „PUK“ pocket saw, fixed handle

• Bench hammer, 300 g

• Cable stripping knife, plastic scales

• VDE/GS Voltage tester

• Combination snips, 190 mm

• Cable cutter, max. 16.9 Ø

Content:

• 2C electrician screwdrivers 75, 75, 125, 150 mm

• 2C engineers’ screwdrivers 100, 150 mm

• 2C cross slotted screwdrivers PH, size 1 + 2

• 2C combination pliers, 180 mm

• 2C telephone pliers, 200 mm

• 2C side cutters, 160 mm

• 2C telephone pliers, 200 mm

• 2C water pump pliers, 240 mm

• ESD electronic side cutters, 115 mm

• ESD electronic needle nose pliers, 130 mm

• Electronic screwdriver set, 7-pieces

• Solder for electronic work, Sn 60%, 1.5 mm, 100 g

• Claw retriever with fixed shaft, size 165

• 2C piercing awl, square

• 2C socket wrenches 7, 8, 10

• Checking mirror, 210 mm

• Socket wrench set, 1/4”, 33 piece

• Contact soldering iron, 30 watt

• Cable stripping knife, plastic handle

• Bench hammer, 300 g

• Universal saw, heavy 150 mm

• Cable stripper, 0.5 - 4 mm Ø

• Combination snips, 190 mm

• VDE/GS Voltage tester

• Tweezer angled

rigid case, black, 28 compartments, 1 combination lock, 1 separation for documents, 2 plate for tools, 2 lockable locks, ground bowl with variables to dividing bars, framed push border

Content:

• 2C-VDE electrician‘s screwdrivers

2.5 x 75, 4 x 100, 5.5 x 125 und 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

• 2C combination pliers, 185 mm

• 2C side cutters, 165 mm

• 2C telephone pliers, 200 mm

• 2C wire stripping pliers, 160 mm

• Wire stripper, hooked blade, 8 - 28 mm Ø

• Cable knife, 1 blade

• Engineers’ hammer, 300 g

• PUK pocket saw, fixed handle

• Electricians’ chisel, 10 x 250 mm

• Paint scraper, 40 mm

• Voltage tester, blade 50 mm

• Measuring tape, 3 m

• Water brush

rigid case, black, 28 compartments, 1 combination lock, 1 separation for documents, 2 plate for tools, 2 lockable locks, ground bowl with variables to dividing bars, framed push border

Content:

• 2C-VDE electrician‘s screwdrivers

2.5 x 75, 4 x 100, 5.5 x 125 und 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

• 2C combination pliers, 185 mm

• 2C side cutters, 165 mm

• 2C telephone pliers, 200 mm

• 2C wire stripping pliers, 160 mm

• Wire stripper, hooked blade, 8 - 28 mm Ø

• Cable knife, 1 blade

• Engineers’ hammer, 300 g

• PUK pocket saw, fixed handle

• Electricians’ chisel, 10 x 250 mm

• Paint scraper, 40 mm

• Voltage tester, blade 50 mm

• Measuring tape, 3 m

• Water brush

rigid case, signal red, with Alu frame and 2 locks, with 3 plates with many compartements for tools

Content:

• 2C-VDE electrician‘s screwdriver 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdriver PH, size 1 + 2

• VDE telephone pliers, straight, 200 mm

• VDE telephone pliers, bent, 200 mm

• VDE combination pliers 185 mm

• VDE side cutters 165 mm

• VDE wire stripping pliers 160 mm

• Socket wrenches 5.5, 7, 8, 10 mm

• Voltage tester „Profi“

• Hexagon sockets 10, 11, 12, 13, 14, 15, 16

• Reversible ratchet 1/2“

• T-sliding handle 1/2“

• Open end spanners 10, 12, 13, 19, 22, 24

• Cable knife

• Cable scissors 200 mm

• Slip-on bushes 5-pieces No. 1, 10 mm

• Slip-on bushes 5-pieces No. 2, 10 mm

• Slip-on bushes 5-pieces No. 3, 10 mm

• Plastic pliers 180 mm

• Plastic clamp

• Covering tape, grey

• Covering tape, red

• Safety grip

• Gloves size 9

Contents:
• 2C-VDE electrician’s screwdrivers
2,5 x 75, 4 x 100, 6,5 x 150, 8,0 x 175, 10,0 x 200 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• 2C-VDE cross slotted screwdrivers PZ, size 1 + 2
• Retaining screwdrivers 100, 125 mm
• Retaining screwdriver, cross-slotted
• Right angle allen keys, 6, 8 mm
• VDE round nose pliers, 160 mm
• VDE telephone pliers, straight, 200 mm
• VDE telephone pliers, bent, 200 mm
• VDE combination pliers 185 mm
• VDE wire stripping pliers 160 mm
• VDE side cutter, 165 mm
• Socket wrenches 5,5, 6, 7, 8 mm
• Voltage Tester „Profi“
• Cable knife, insulated
• Cable knife
• Cable scissor
• Plastic pliers 180 mm
• Covering tape, red 10 m
• NH-safe

Content:
• 2C-VDE electrician‘s screwdrivers
2,5 x 75, 4 x 100, 5,5 x 125 und 6,5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH, size 1 + 2
• 2C-VDE screwdrivers PZ/FL, size 1 + 2
• 2C-VDE combination pliers 185 mm
• 2C-VDE diagonal cutter 165 mm
• 2C-VDE telephone pliers 200 mm
• 2C-VDE cable cutter 200 mm
• 2C-VDE water pump pliers 240 mm
• VDE cable knive, straight blade, 50 mm
• Safety glasses „PRO“
• Automatic wire stripper 0,2 - 6 mm2
• Voltage tester „TestPen“
• Voltage tester „Profi“
• Finger gloves, size 9
• Ear protection plugs
• NH-safety fuse grip

Content:

• Electrician’s screwdrivers 75, 100, 150, 175, 200 mm

• Cross slotted screwdriver, PH size 1 + 2

• Cross slotted screwdriver, PZ No. 1 + 2

• VDE round nose pliers 160 mm

• VDE telephone pliers, straight, 200 mm

• VDE telephone pliers, bent, 200 mm

• VDE combination pliers 185 mm

• VDE side cutter 165 mm

• VDE wire stripping pliers 160 mm

• Retaining screwdrivers 100, 125 mm

• Retaining screwdriver cross-slotted

• Right angle allen keys, 6, 8 mm

• 2C-VDE socket wrenches 5,5, 6, 7, 8 mm

• Voltage tester ”Profi”

• Cable knife, insulated

• Cable knife

• Cable scissor

• Plastic pliers 180 mm

• Self adhesive PVC tape, red, 10 m

• NH-Safety grip

• Finger gloves, size 9

hard-side case, HDPE, extremely robust, black, 3 tool sections, 2 locks, document pocket, with high-grade fittings, bottom half of case equipped with variable partitions

Roomy and organised – the HAUPA tool trolley “HUPtransporter” provides a lot of space for tools

With an additional tool tray, the tool trolley “HUPtransporter” offers an enormous amount of space for tool storage. The boards are clearly arranged, allowing easy access to tools at all times. Stable pockets and loops ensure that each tool reliably stays in its assigned spot, unless it is needed.

• Extremely sturdy case: polypropylene (PP) housing

• With gas pressure springs

• Fit for flight: automatic air-pressure release valve

• Stackable

• Dust-proof

• Protected against water splashes

• Temperature stable from -30°C to +80°C

• Ergonomic two-component handle

• Eyelets for padlock

• Aluminium divider system

• Foam insert optional

• Colour: black

• With owner label

Roomy and organised – the HAUPA tool trolley “HUPtransporter Pro” provides a lot of space for tools

Extremely sturdy case: polypropylene (PP) housing, with gas pressure springs, fit for flight: automatic air pressure release valve, stackable, dust-proof, protected against water splashes, temperature stable from -30°C to +80°C, ergonomic two-component handle, eyelets for padlock, aluminium divider system, foam insert optional, colour: black, with owner label, tool trolley “HUPtransporter” 220820

Contents:

• Wire stripper 0.2 – 6 mm²

• Crimping pliers insulated cable lugs 0.5 – 6 mm²

• VDE electrician’s scissors, stainless steel, 160 mm, 70 mm²

• VDE long chain nose pliers, curved, 200 mm*

• VDE cable cutter 160 mm*

• VDE side cutters 160 mm*

• VDE combination pliers 180 mm*

• Switch cabinet key

• VDE cable stripping knife, hook blade, 50 mm

• Utility knife “HUPblackSeries18”

• Blades “HUPblades18”

• Switch cabinet level 200 mm

• Cable stripper, hook blade 8 – 28 mm²

• Deep hole marker, 2-in-1, black, with sharpener

• Electronic ESD side cutter, without cutting-facet, 115 mm

• Hexagon angle screwdriver set, with spherical head, 9-pcs, 1.5 – 10 mm, extra long

• PUK saw with fixed handle

• Uni stripper 0.2 – 4 mm²

• VDE screwdriver HUPslim PZ/FL 1 + 2

• VDE screwdriver HUPslim PZ 1 + 2

• VDE screwdriver HUPslim PH 1 + 2

• VDE electrician’s screwdriver HUPslim 3.5 x 0.6 x 100, 4 x 0.8 x 100 mm, 4 x 1 x 100 mm, 5.5 x 1 x 125 mm, 6.5 x 1.2 x 150 mm

• Electrician’s chisel 10 x 250 mm

• Stone chisel, flat oval 32 x 300 mm

• Ratchet spanner 4-in-1, 8 x 10 + 12 x 13 mm

• Ratchet spanner 4-in-1, 10 x 13 + 17 x 19 mm

• Crimping pliers for end sleeves 0.5 – 16 mm

• Single-hand cable cutters max. Ø 34 mm

• VDE water pump pliers 240 mm

• VDE heavy duty diagonal cutter 200 mm

• VDE pliers wrench 280 mm

• Measuring tape 5 m

• Measuring stick 1 m

• Light metal level 400 mm

• LED torch “Pen Torch”

• Crimping pliers 0.75 – 16 mm

• Voltage tester “Profi LED Plus” 12 – 1000 V

• Ratchet screwdriver set “FlexBagPro”

• Fitter's hammer 500 g

• PU cut-protection glove, level 3, grey, size 10

• Safety glasses

Roomy and organised – the HAUPA tool trolley “HUPtransporter StandardPlus” provides a lot of space for tools

Extremely sturdy case: polypropylene (PP) housing, with gas pressure springs, fit for flight: automatic air pressure release valve, stackable, dust-proof, protected against water splashes, temperature stable from -30°C to +80°C, ergonomic two-component handle, eyelets for padlock, aluminium divider system, foam insert optional, colour: black, with owner label, tool trolley “HUPtransporter” 220820

Contents:

• Wire stripper “Basic” 0.5 – 6 mm²

• Crimping pliers insulated cable lugs 0.5 – 6 mm²

• VDE electrician’s scissors, stainless steel, 160 mm, 70 mm²

• VDE long chain nose pliers, curved, 200 mm*

• VDE cable cutter 160 mm*

• VDE side cutters 160 mm*

• VDE combination pliers 180 mm*

• Switch cabinet key

• VDE cable stripping knife, straight blade

• Utility knife “HUPblackSeries18”

• Blades “HUPblades18”

• Switch cabinet level 200 mm

• Cable stripper, hook blade 8 – 28 mm²

• Deep hole marker, 2-in-1, black, with sharpener

• Electronic ESD side cutter, without cutting-facet, 115 mm

• Hexagon angle screwdriver set, with spherical head, 9-pcs, 1.5 – 10 mm, extra long

• PUK saw with fixed handle

• Uni stripper 0.2 – 4 mm²

• VDE screwdrivers HUPslim PZ/FL 1 + 2, HUPslim PZ 1 + 2, HUPslim PH 1 + 2

• VDE electricians screwdriver HUPslim 3.5 x 0.6 x 100, 4 x 0.8 x 100 mm, 4 x 1 x 100 mm, 5.5 x 1 x 125 mm, 6.5 x 1.2 x 150 mm

• Electrician’s chisel 10 x 250 mm

• Stone chisel, flat oval 32 x 300 mm

• Crimping pliers for end sleeves 0.5 – 16 mm

• VDE heavy duty diagonal cutter 200 mm

• VDE pliers wrench 280 mm

• Measuring tape 5 m

• Measuring stick 1 m

• Light metal level 400 mm

• LED torch “Pen Torch”

• Crimping pliers 0.75 – 16 mm

• Ratchet screwdriver set “FlexBag”

• Voltage tester “Profi LED Plus” 12 – 1000 V

• Basic stripper 4 – 13 mm

• Fitter’s hammer 500 g

• PU cut-protection glove, level 3, grey, size 10

• Safety glasses

Aluminium case, equipped with 54 safety tools. Size: 830 mm x 550 mm x 300 mm, weight: 37 kilos.

Content:
• 2C-VDE socket wrenches 5, 5,5, 7, 8, 10, 11, 13 mm
• Voltage-Tester
• 2C-VDE electrician’s screwdrivers 2,5 x 75, 3 x 100, 4 x 100, 5,5 x 125, 6,5 x 150 mm
• 2C-VDE cross-slotted-screwdrivers PH, size 1, 2
• 2C-VDE cross-slotted-screwdrivers PZ, size 0, 1, 2
• VDE right angle-allen key 3
• VDE right angle-allen key 4
• VDE right angle-allen key 5
• VDE right angle-allen key 6
• VDE right angle-allen key 8
• VDE right angle-allen key 10
• VDE right angle-allen key 12
• VDE open-End Spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30 32
• spanner for switch-cabinets
• finger gloves, size 10
• VDE safety face mask
• VDE safety grip
• VDE electricans boots, size 42
• VDE insulating floor mat
• VDE rubber towels 600 mm
• VDE plastic clip 160 mm (2-pieces)
• Slip-on busches 10 mm (4-pieces)
• Safety belt 1400 mm
• Fallstop-breaking device and rope shortening 2 m
• VDE knife with strong blade
• VDE cable cutter 200 mm
• VDE combination pliers 185 mm
• VDE side cutter 185 mm
• VDE long chain nose pliers 200 mm
• VDE wire stripping pliers 160 mm
• VDE tweezer, pointed round 150 mm
• Fall breaking belt typ A

Show profile – give your tool case your name! Logo and name in noble laser design on aluminium plate.

You decide where it’s placed!

black plastic, including pick boxes.

Content:
6 x Box 49 x 49 x 72 mm
11 x Box 49 x 98 x 72 mm
2 x Box 98 x 98 x 72 mm
2 x Box 98 x 148 x 72 mm

body made from a solid brass block, hardenend steel shackle, with 2 keys

with 2 spring hooks