380
PU Packing unit PE Price unit
The legend for abbreviations for all table headers can be found sorted alphabetically on page 408.
HUPchemie - Adhesion+Sealing
2 Component-epoxyd glue HUPepoxyd
How to use
HUPexpoxyd:
Gluing of metal, (hard) plastic, ceramics, glass, porcelain,
stone, wood, concrete, rubber and much more. Ideal for
gluing tasks with high visual requirements. Clean the
surfaces to be glued, open the cap and screw the mixing
nozzle into place. Dispose of the first 2 g since this will not
be mixed 1:1. Then apply the glue and join the parts. Remove
the mixing nozzle and dispose it. Replace the cap. Store open
cartridges in a cool place and use as soon as possible (you
can also work without the nozzle).
Properties:
Temperature resistant: -40°C to +80°C. Processing
temperature: +10°C to +30°C. Final hardness: 24 hours.
Open time: approximately 5 minutes.
Art. no.
kg PU
170222
0,025 1
ml
25
Adhesion+Sealing
2 Component liquid metal HUPfastMetal
How to use
HUPfastMetal:
Repair of cracks, drill holes, holes etc. Suitable for extremely
strong adhesion of metal and metal alloys (steel, aluminium).
Clean the surfaces to be glued, open the cap and screw the
mixing nozzle into place. Dispose of the first 2 g since this
will not be mixed 1:1. Then apply the glue and join the parts.
Remove the mixing nozzle and dispose it. Replace the cap.
Store open cartridges in a cool place and use as soon as
possible (you can also work without the nozzle).
Properties:
Temperature resistant: -50°C to +120°C, Open time
approximately 5 - 10 minutes. After approximately 30
minutes, you will be able to mechanically process the
repaired location.
Art. no.
kg PU
170224
0,025 1
ml
25
Adhesion+Sealing
HUPsuperglue
How to use
HUPsuperglue:
The surfaces must be clean and free of oil or grease. Apply a
thin layer of HUPsuperglue to one side and join the parts.
Art. no.
kg PU
170226
0,020 1
ml
20
Adhesion+Sealing
Fine droplet tip
Art. no.
kg PU
170236
0,001 1
Adhesion+Sealing
Double-Sided Acryl Tape
HUPtapeDouble
How to use
HUPtapeDouble:
Permanent and safe hold on almost all smooth surfaces such as metal, wood,
glass, plastic, ceramics and rubber. Ideal for mounting brackets, signs, hooks,
shelf elements, etc.
Not suitable for: PE, PP, PTFE (e.g. Teflon
®
), silicone, paper and vinyl wallpaper,
non-load-carrying surfaces as well as surfaces with dirt-repelling coatings.
Properties:
HUPtapeDouble is an extremely strong, double-sided sticky tape. For durable
adhesion, installation and securing both indoors and outdoors. Load up to a
maximum of 1.3 kg.
Transparent. Surfaces are not damaged. Moisture resistant.
Used in dry, clean and well-aired areas with temperatures of +10°C to +30°C.
Art. no.
kg PU
170232
0,050 1
Adhesion+Sealing
UV-Hardening GRP Repair-Film
HUPplaxUV
How to use
HUPplaxUV:
Easy to use – cut to the size of the surface to be repaired, done. Extremely
durable, fibre-glass reinforced plastic, vibration resistant, remains flexible,
weather, UV and moisture resistant. Good subsequent processing (sanding,
drilling, painting, etc.), resistant to oils and solvents, permanently temperature
resistant from -40°C to +200°C, no shrinking or expansion during processing
and hardening, adheres to all surfaces except polypropylene (PP), quick to
harden (as of 5 minutes, depending on UV radiation).
Properties:
HUPplaxUV is a unique, easy to use repair foil that is activated and hardened
by UV radiation or sunlight. The foil is a fibre-glass reinforced polyester with
extremely good adhesive and a long life. No mixing, no weighing, no sources of
error.
Maintenance and repair of roofs, stairs, basins. pipes, lines, cable ducts,
switching cabinets etc., all surfaces made of wood, metal, glass, ceramic,
brickwork, cement and plastic.
Art. no.
kg PU
170230
0,120 1
Adhesion+Sealing
